Sony DXC-327BF, Руководство по эксплуатации

Страница: 58 / 80

58
A. IRIS
DETAIL
M. PED
SHUTTER
:
:
: 00
:
2
1
Adjusting the Contrast
To adjust the contrast, change the pedestal level.
When the master pedestal level is raised, the dark
portion of the picture brightens, and when the level is
lowered, the corresponding portion darkens. You can change the level from about –30% to +30% of
reference level (0.7 V) in increments of 1%. The
adjusted master pedestal level is kept in the memory of
the camera.
UP/ON button,
DOWN/OFF button
DISP CHG switch
1
Press the DISP CHG switch several times until the
display above appears on the viewfinder screen.
2
Change the master pedestal.
To raise the level: Press the UP/ON button on the
camera head.
To lower the level: Press the DOWN/OFF button
on the camera head.
To reset the level to the reference level: Press
the UP/ON and DOWN/OFF buttons
simultaneously.
Notes
• If the CCU-M7/M7P, CCU-M5/M5P Camera Control
Unit or RM-M7G Camera Remote Control Unit is
connected to the camera, set the master pedestal level
from the CCU or RM-M7G. It cannot be set on the
camera.
• To check the master pedestal level on a waveform
monitor during adjustment, set the ABL switch on the
camera to OFF. When the ABL switch is set to ON,
appropriate waveform will not appear on the monitor
screen.
Flashes
Master pedestal level
Current setting value:
the percentage of the
reference level.
Adjustment and Settings
..