Sony DXC-327BF, Руководство по эксплуатации

Страница: 19 / 80

19
Focusing
1
Focus ring
To focus, turn this ring.
2
Ff (flange focal length) adjustment ring
To adjust the Ff, release the screw and turn the ring.
3
MACRO (close-up) ring and button
To do close-up, turn the MACRO ring while sliding
the button.
4
Focus remote control connector (3-pin)
Not used.
Iris adjustment
5
Iris ring
To manually adjust the iris, turn this ring with the iris
selector set to M.
6
IRIS selector
A (automatic): Select to adjust the iris automatically.
M (manual): Select to adjust the iris manually.
7
Instant automatic iris adjustment button
To automatically adjust the iris during manual iris
adjustment, keep this button depressed. When the
button is released, the iris will remain at the value that
has just been obtained and will stay that way until you
manually adjust the iris again.
Zoom controls
8
ZOOM selector
S (servo): Select for motorized zoom action.
M (manual): Select for manual zoom.
9
Manual zoom lever
To do manual zoom, move this lever with the ZOOM
selector set to M.
0
Zoom remote control connector (8-pin)
To do remote control zoom when the camera is
attached to a tripod, connect an LO-23 Lens Remote
Control Unit (optional) here.
!¡
Motorized zoom switch
For motorized zoom action, set the zoom selector to S.
Then, press either end of the motorized zoom switch,
W for a wide angle shot, and T for a telephoto shot.
Press the switch down all the way for faster zoom
action and only slightly for slow zoom action.
Recording controls
!™
RET (return video) button
When a portable VTR is connected, keep this button
depressed to monitor the E-E picture on the
viewfinder screen. Release the button to monitor
the camera picture.
When a CCU-M7/M7P or CCU-M5/M5P Camera
Control Unit is connected, keep this button depressed
to monitor the return video picture on the
viewfinder screen. Release the button to monitor
the camera picture.
!£
VTR button
When a portable VTR is connected, press this button
to stop and start recording. This button has the
same function as the VTR button on the camera
head.
When a CCU-M7/M7P or CCU-M5/M5P Camera
Control Unit is connected, keep this button depressed
to monitor the return video picture on the
viewfinder screen. Release the button to monitor
the camera picture. Starting and stopping
recording is controlled on the VTR.