34
20
Press
X
/
x
to select the size of the
rear speakers.
If no rear speaker is connected, select
“NONE.”
21
Press ENTER.
“SUBWOOFER” is selected.
22
Press
X
/
x
to select whether or
not you have connected a
subwoofer.
23
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 27 to
29 (
through
). Each of these is the
default setting and does not need to be adjusted
when you first connect the player. Refer to
page 74 for using the Setup Display.
Audio Connection (pages 26 to 29)
• No additional settings are needed.
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 80).
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 80).
• Set “DIGITAL OUT” to “ON” (page 81).
• Set “DISTANCE,” “LEVEL (FRONT),”
and “LEVEL (REAR)” according to the
connected speakers (page 83).
z
Hints
• For connections
Set “48kHz/96kHz PCM” to “96kHz/24bit,” only
if you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency
(page 81).
• For connections
If the sound distorts even when the volume is
turned down, set “AUDIO ATT” to “ON”
(page 80).
SPEAKER SETUP (DVD)
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
OFF
TEST TONE:
FRONT:
CENTER:
LARGE
LARGE
REAR:
SUBWOOFER:
To set, press , then .
To quit press
ENTER
ENTER
SETUP
DISPLAY
DISPLAY
YES
YES
NONE
LARGE
B
D
A
B-1
C-1
B-2
C-2
D-2
D-1
B-2
C-2
D-2
B-1
C-1
D-1