l
When you set the item to
“AUTO,”
the language
may change. The “TRACK
SELECTION”
setting
has higher priority than the “AUDIO” settings in
“LANGUAGE SETUP” (page 74).
l
If PCM, MPEG audio, DTS, and Dolby Digital
sound tracks have the same number of channels,
the player selects PCM,
MPEG audio, DTS, and
Dolby Digital sound tracks in this order.
MULTI-DISC RESUME (DVD VIDEO/
VIDEO CD only)
Switches the Multi-disc Resume setting on or
off. Resume playback point can be stored in
memory for up to 40 different DVD VIDEO/
VIDEO CD discs (page 37).
O N
O F F
Stores the resume settings in
memory for up to 40 discs (The
settings remain in memory even
if you select OFF.)
Does not store the resume
settings in memory. Playback
restarts at the resume point only
for the current disc in the player.
CD DIRECT
Eliminates the use of unnecessary circuits
when playing CDs. This setting will be
activated when you open or close the disc
tray.
This function affects the output from the
following jacks:
-LINE OUT L/R (AUDIO)
jacks
OUTPUT jacks
O F F
Select this when playing CD
discs, including CDs with DTS
tracks.
O N
Eliminates the use of
unnecessary circuits needed to
play CDs.
If you select “ON” when playing CDs with DTS
tracks, the sound will become noisy.
Settings for the Sound
(AUDIO SETUP)
“AUDIO SETUP” allows you to set the sound
according to the playback and connection
conditions.
Select “AUDIO SETUP” in the Setup
Display. To use the display, see “Using the
Setup Display” (page 73).
The default settings are underlined.
AUDIO ATT (attenuation)
If the playback sound is distorted, set this
item to “ON.” The player reduces the audio
output level.
This function affects the output of the
following jacks:
-LINE OUT L/R (AUDIO)
jacks
OUTPUT jacks
O F F
ON
Normally, select this position.
Select this when the playback sound
from the speakers is distorted.
AUDIO DRC (Dynamic Range Control)
(DVD
only)
Makes the sound clear when the volume is
turned down when playing a DVD that
conforms to “AUDIO DRC.” This affects the
output from the following jacks:
-LINE OUT L/R (AUDIO)
jacks
OUTPUT jacks
DIGITAL OUT (OPTICAL or COAXIAL)
jack only when “DOLBY DIGITAL” is set
to “D-PCM” (page 79).
STANDARD
Normally select this position.
TV MODE
Makes the low sounds clear
even if you turn the volume
down.
WIDE
Gives you the feeling of being
RANGE
at a live performance.
