Sony DVP-NC875V, Руководство по обслуживанию, Страница: 11 / 99

1-5
DVP-NC875V
23
H
o
o
kups
Step 4: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections, through .
Components to be connected Connection Your setup (example)
TV
• Surround effects:
– TVS DYNAMIC (page 54)
– TVS WIDE (page 54)
(page 25)
Stereo amplifier (receiver) and two speakers
• Surround effects:
– TVS STANDARD (page 54)
or
MD deck/DAT deck
• Surround effects:
– TVS STANDARD (page 54)
(page 26)
AV amplifier (receiver) having a Dolby *
1
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects:
– Dolby Surround (Pro Logic) (page 89)
(page 27)
AV amplifier (receiver) with 5.1 ch input jacks
and 4 to 6 speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 89)
– DTS (5.1 ch) (page 89)
– Super Audio CD Multi channel (page 89)
or
AV amplifier (receiver) with digital input jacks
having a Dolby Digital, or DTS
*
2
decoder and 6
speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 89)
– DTS (5.1 ch) (page 89)
(page 28)
A D
A
B
C
D
, continued 24
z Hint
If you connect an AV amplifier (receiver) that
conforms to the 96 kHz sampling frequency, use
connection .
*1 Manufactured under license from Dolby
Laboratories. “Dolby,” “Pro Logic,” and the
double-D symbol are trademarks of Dolby
Laboratories.
*2 Manufactured under license from Digital
Theater Systems, Inc. U.S. Pat. No’s.
5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,226,616; 6,487,535 and other U.S. and world-
wide patents issued and pending. “DTS” and
“DTS Digital Surround” are registered
trademarks of Digital Theater Systems, Inc.
Copyright 1996, 2003 Digital Theater Systems,
Inc. All Rights Reserved.
D
25
H
o
o
kups
Connecting to your TV
This connection will use your TV’s speakers for sound.
* The yellow plug is used for video signals (page
19).
z Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT L/R (AUDIO) jacks to the TV’s audio
input jack.
A
OPTICAL
FRONT
COAXIAL
PCM/DTS/
DOLBY
DIGITAL
DIGITAL
OUT
5.1CH OUTPUT
REAR
CENTER
WOOFER
L
R
AUDIO
R
LINE OUT
S VIDEO
OUT
L
VIDEO
Y
COMPONENT
VIDEO OUT
PR PB
A
AUDIO
R
LINE OUT
L
VIDEO
TV
l : Signal flow
CD/DVD player
(white)
(red)
Audio/video
cord (supplied)
to audio input
(yellow) *
(white)
(red)
(yellow) *
to LINE OUT
L/R (AUDIO)
, continued 26
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use . If the amplifier
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use .
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
Note
Super Audio CD audio signals are not output from
the DIGITAL OUT jacks.
B
B-1
B-2
OPTICAL
FRONT
COAXIAL
PCM/DTS/
DOLBY
DIGITAL
DIGITAL
OUT
5.1CH OUTPUT
REAR
CENTER
WOOFER
L
R
AUDIO
R
LINE OUT
S VIDEO
OUT
L
VIDEO
Y
COMPONENT
VIDEO OUT
PR PB
B-1 B-2
AUDIO
R
LINE OUT
L
VIDEO
OPTICAL
COAXIAL
PCM/DTS/
DOLBY
DIGITAL
DIGITAL
OUT
CD/DVD player
or
Stereo amplifier (receiver)
MD deck/DAT deck
Front (L)
Front (R)
[Speakers]
(white)
(red)
(red) (white)
Optical digital cord
(not supplied)
Stereo audio cord
(not supplied)
to audio input to coaxial or optical digital input
Coaxial digital cord
(not supplied)
or
l : Signal flow
to LINE OUT L/R (AUDIO)
to DIGITAL OUT
(COAXIAL or OPTICAL)