Sony DVP-NC615 Скачать руководство пользователя страница 26

Страница: 26 / 127

1-16

◆

DOWNMIX (DVD only)

Switches the method for mixing down to 2
channels when you play a DVD which has
rear sound elements (channels) or is recorded
in Dolby Digital format. For details on the
rear signal components, see “Checking the
audio signal format” (page 47). This function
affects the output of the following jacks:
– LINE OUT L/R (AUDIO) jacks
– DIGITAL OUT (COAXIAL) jack when

“DOLBY DIGITAL” is set to “D-PCM”
(page 66).

◆

DIGITAL OUT

Selects if audio signals are output via the
DIGITAL OUT (COAXIAL) jack.

Setting the digital output signal

Switches the method of outputting audio
signals when you connect a component such
as an amplifier (receiver) or MD deck with a
digital input jack.
For connection details, see page 20.
Select “DOLBY DIGITAL,” “MPEG” and
“DTS” after setting “DIGITAL OUT” to
“ON.”

If you connect a component that does not
conform to the selected audio signal, a loud
noise (or no sound) will come out from the
speakers, affecting your ears or causing the
speakers to be damaged.

◆

DOLBY DIGITAL (DVD only)

Selects the type of Dolby Digital signal.

DOLBY
SUR-
ROUND

Select this when the player is
connected to an audio
component that conforms to
Dolby Surround (Pro Logic).

NORMAL

Select this when the player is
connected to an audio
component that does not
conform to Dolby Surround (Pro
Logic).

Normally select this position. When
you select “ON,” see “Setting the
digital output signal” for further
settings.

OFF

The influence of the digital circuit
upon the analog circuit is minimal.

D-PCM

Select this when the player is
connected to an audio
component lacking a built-in
Dolby Digital decoder. You can
select whether the signals
conform to Dolby Surround
(Pro Logic) or not by making
adjustments to the
“DOWNMIX” item in
“AUDIO SETUP” (page 66).

DOLBY
DIGITAL

Select this when the player is
connected to an audio
component with a built-in
Dolby Digital decoder.

AUDIO SETUP

AUDIO ATT:
AUDIO DRC:

DOLBY DIGITAL:
MPEG:

OFF

STANDARD

DOWNMIX:

DOLBY SURROUND

D-PCM

PCM

DTS:

OFF

DIGITAL OUT:

Example: Asian/Oceanian models

Set
tings
a

nd
Adj
us
tm

◆

MPEG (DVD only; For Asian/Oceanian

models only)

Selects the type of MPEG audio signal.

◆

DTS (DVD only)

Selects whether or not to output DTS signal.

Note

If you select one of the TVS settings while playing
a DVD, the player does not output the following
signals from the DIGITAL OUT (COAXIAL) jack.
– Dolby Digital signals (when you set “DOLBY

DIGITAL” in “AUDIO SETUP” to “D-PCM”)
(page 66)

– MPEG audio signals

PCM

Select this when the player is
connected to an audio
component lacking a built-in
MPEG decoder. If you play
MPEG audio sound tracks, the
player outputs stereo signals
via the DIGITAL OUT
(COAXIAL) jack.

MPEG

Select this when the player is
connected to an audio
component with a built-in
MPEG decoder.

OFF

Select this when the player is
connected to an audio
component lacking a built-in
DTS decoder.

Select this when the player is
connected to an audio
component with a built-in DTS
decoder.

Set
tings
a

nd
Adj
us
tm

◆

PAUSE MODE (DVD only)

Selects the picture in pause mode.

◆

TRACK SELECTION (DVD only)

Gives the sound track which contains the
highest number of channels priority when you
play a DVD on which multiple audio formats
(PCM, DTS, MPEG audio or Dolby Digital
format) are recorded.

Notes

• When you set the item to “AUTO,” the language

may change. The “TRACK SELECTION” setting
has higher priority than the “AUDIO” settings in
“LANGUAGE SETUP” (page 62).

• If you set “DTS” to “OFF” (page 67), the DTS

sound track is not played even if you set “TRACK
SELECTION” to “AUTO.”

• If PCM, DTS, MPEG audio and Dolby Digital

sound tracks have the same number of channels,
the player selects PCM, DTS, Dolby Digital, and
MPEG audio sound tracks in this order.

◆

MULTI-DISC RESUME (DVD/VIDEO CD

only)

Switches the Multi-disc Resume setting on or
off. Resume playback can be stored in
memory for up to 6 different DVD/VIDEO
CD discs (page 32).

Settings for the Sound

(AUDIO SETUP)

“AUDIO SETUP” allows you to set the sound
according to the playback and connection
conditions.

Select “AUDIO SETUP” in the Setup
Display. To use the display, see “Using the
Setup Display” (page 61).
The default settings are underlined.
The on-screen displays differ depending on
the player model.

◆

AUDIO ATT (attenuation)

If the playback sound is distorted, set this
item to “ON.” The player reduces the audio
output level.
This function affects the output of the LINE
OUT L/R (AUDIO) jacks.

◆

AUDIO DRC (Dynamic Range Control)

(DVD only)

Makes the sound clear when the volume is
turned down when playing a DVD that
conforms to “AUDIO DRC.” This affects the
output from the following jacks:
– LINE OUT L/R (AUDIO) jacks
– DIGITAL OUT (COAXIAL) jack only

when “DOLBY DIGITAL” is set to “D-
PCM” (page 66).

AUTO

The picture, including subjects
that move dynamically, is
output with no jitter. Normally
select this position.

FRAME

The picture, including subjects
that do not move dynamically,
is output in high resolution.

OFF

No priority given.

AUTO

Priority given.

Stores the resume settings in
memory for up to 6 discs (The
settings remain in memory even
if you select “OFF.”)

OFF

Does not store the resume
settings in memory. Playback
restarts at the resume point only
for the current disc in the player.

OFF

Normally, select this position.

Select this when the playback sound
from the speakers is distorted.

STANDARD

Normally select this position.

TV MODE

Makes the low sounds clear
even if you turn the volume
down.

WIDE
RANGE

Gives you the feeling of being
at a live performance.

AUDIO SETUP

AUDIO ATT:
AUDIO DRC:

DIGITAL OUT:

OFF

STANDARD

DOWNMIX:

DOLBY SURROUND

DOLBY DIGITAL:
DTS:

D-PCM

OFF

continued

Additional Information

Troubleshooting

If you experience any of the following
difficulties while using the player, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer.

Power

The power is not turned on.

Check that the AC power cord is connected
securely.

Picture

There is no picture/picture noise appears.

Re-connect the connecting cord securely.

The connecting cord is damaged.

Check the connection to your TV (page 18)
and switch the input selector on your TV so
that the signal from the player appears on
the TV screen.

The disc is dirty or flawed.

If the picture output from your player goes
through your VCR to get to your TV or if
you are connected to a combination TV/
VIDEO player, the copy-protection signal
applied to some DVD programs could affect
picture quality. If you still experience
problems even when you connect your
player directly to your TV, please try
connecting your player to your TV’s S
VIDEO input (page 18).

If the color system of your player does not
match with that of your TV, change the
color system of the player. For details, see
page 16. (You cannot change the color
system of the DVD disc itself.)

Even though you set the aspect ratio in “TV
TYPE” of “SCREEN SETUP,” the picture
does not fill the screen.

The aspect ratio of the disc is fixed on your
DVD.

The picture is black and white.

Depending on the TV, the picture on the

screen becomes black and white when you
play a disc recorded in the NTSC color
system.

Sound

There is no sound.

Re-connect the connecting cord securely.

The connecting cord is damaged.

The player is connected to the wrong input
jack on the amplifier (receiver) (page 22,
23, 24).

The amplifier (receiver) input is not
correctly set.

The player is in pause mode or in Slow-
motion Play mode.

The player is in fast forward or fast reverse
mode.

If the audio signal does not come through
the DIGITAL OUT (COAXIAL) jack,
check the audio settings (page 66).

While playing a Super VCD on which the
audio track 2 is not recorded, no sound will
come out when you select “2:STEREO,”
“2:1/L” or “2:2/R.”

Sound is noisy.

When playing a CD with DTS sound tracks,
noise will come from the LINE OUT L/R
(AUDIO) jacks or DIGITAL OUT
(COAXIAL) jack (page 28).

Sound distortion occurs.

Set “AUDIO ATT” in “AUDIO SETUP” to
“ON” (page 65).

The sound volume is low.

The sound volume is low on some DVDs.
The sound volume may improve if you set
“AUDIO DRC” to “TV MODE” (page 65)
and set “DOWNMIX” to “NORMAL”
(page 66).

Set “AUDIO ATT” in “AUDIO SETUP” to
“OFF” (page 65).

Operation

The remote does not function.

There are obstacles between the remote and
the player.

The distance between the remote and the
player is too far.

The remote is not pointed at the remote
sensor on the player.

The batteries in the remote are weak.

www. xiaoyu163. com

QQ 376315150

TEL 13942296513