Sony DVP-NC615 Скачать руководство пользователя страница 14

Страница: 14 / 127

1-4

St
art
G

Step 4: Playing a Disc

Turn on the TV.

Press

[

on the player.

Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.

Press

on the player to open the

disc tray.

Place the disc on the tray with the
playback side facing down.

Press

The disc tray closes and the player begins
playing the disc.

After Step 6

Depending on the disc, a menu may be
displayed on the TV screen. If so, select the
item you want from the menu and play the
DVD (page 33) or VIDEO CD disc (page 33).

To stop playing

Press

To remove the disc

Press

To turn off the player

Press

[

. The player enters standby mode

and the power indicator lights up in red.

With the playback side facing down

Disc compartment number

Hookups

Hooking Up the Player

Follow Steps 1 to 4 to hook up and adjust the settings of the player.
Before you start, disconnect the power cords, check that you have all of the supplied accessories,
and insert the batteries into the remote (page 15).

Notes

• Plug cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.

Step 1: Connecting the Video Cords

Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
Select one of the patterns

through

, according to the input jack on your TV monitor,

projector, or AV amplifier (receiver).

: Signal flow

Component video
cord (not
supplied)

(yellow)

Audio/video cord
(supplied)

TV, projector or AV
amplifier (receiver)

CD/DVD player

TV, projector or AV
amplifier (receiver)

(green)

S VIDEO cord
(not supplied)

TV, projector or AV
amplifier (receiver)

(red)

(blue)

(yellow)

(green)

(blue)

(red)

to LINE OUT (VIDEO)

ook

up
s

If you are connecting to a video input jack

Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will
enjoy standard quality images.

Use the red and white plugs to connect to the audio input jacks (page 21). (Do this if you are
connecting to a TV only.)

If you are connecting to an S VIDEO input jack

Connect an S VIDEO cord (not supplied). You will enjoy high quality images.

If you are connecting to a monitor, projector, or AV amplifier (receiver)

having component video input jacks (Y/P

or Y/C

)

Connect the component via the COMPONENT VIDEO OUT jacks using a component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate color reproduction and high quality images.

Notes

• Connect the player directly to the TV. If you pass the player signals via the VCR, you may not receive a

clear image on the TV screen.

•

For Asian/Oceanian models only

You can switch the player’s color system to match the color system of the connected TV (page 16).

Yellow (Video)

White (L)

Red (R)

Yellow (Video)

White (L)

Red (R)

Green

Blue

Red

Green

Blue

Red

VCR

CD/DVD player

Connect
directly

continued

Step 2: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.

Select a connection

Select one of the following connections,

through

* Manufactured under license from Dolby

Laboratories. “Dolby,” “Pro Logic,” and the
double-D symbol are trademarks of Dolby
Laboratories.

** “DTS” and “DTS Digital Out” are trademarks

of Digital Theater Systems, Inc.

Components to be connected

Connection

Your setup

• Surround effects: TVS DYNAMIC (page 48),

TVS WIDE (page 48)