Sony DVP-K370 Скачать руководство пользователя страница 13

Страница: 13 / 106

1-5

Step 2: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.

Select a connection

Select one of the following connections,

through

* Manufactured under license from Dolby

Laboratories. “ Dolby,” “ Pro Logic,” and the
double-D symbol are trademarks of Dolby
Laboratories.

** “ DTS” and “ DTS Digital Out” are trademarks

of Digital Theater Systems, Inc.

Components to be connected

Connection

Your setup

• Surround effects: TVS DYNAMIC (page 52),

TVS WIDE (page 52)

(page 21)

example

Stereo amplifier (receiver) and two speakers

• Surround effects: TVS STANDARD (page 52)
or

MD deck/DAT deck

• Surround effects: none

(page 22)

example

AV amplifier (receiver) having a Dolby

Surround (Pro Logic) decoder and 3 to 6
speakers

• Surround effects: Dolby Surround (Pro Logic)

(page 74)

(page 23)

example

AV amplifier (receiver) with a digital input jack
having a Dolby Digital, MPEG audio, or DTS

decoder and 6 speakers

• Surround effects: Dolby Digital (5.1ch) (page 74),

DTS (5.1ch) (page 74), MPEG audio (5.1 ch)
(page 74)

(page 24)

example

ook

up
s

Connecting to your TV

This connection will use your TV speakers for sound.

* The yellow plug is used for video signals (page

18).

Hint

When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT L/R (AUDIO) 1/2 jacks to the TV’s
audio input jack.

PCM/DTS/MPEG
DOLBY DIGITAL

COAXIAL

OPTICAL

AUDIO

VIDEO

DIGITAL OUT

LINE OUT

S VIDEO

OUT

COMPONENT

VIDEO OUT

AUDIO

VIDEO

LINE OUT

: Signal flow

CD/DVD player

(white)

(red)

Audio/video
cord (supplied)

to audio input

(yellow)

(white)

(red)

(yellow)

to LINE OUT L/R
(AUDIO) 1 or 2

continued

Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to

an MD deck or DAT deck

If the stereo amplifier (receiver) has audio input jacks L and R only, use

. If the amplifier

(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use

In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).

Hint

In connection

, you can use the supplied

audio/video cord instead of using a separate stereo
audio cord.

Note

If you select one of the TVS effects (page 51) while
playing a disc, no sound will come from your
speakers with the

connection.

B-1

B-2

PCM/DTS/MPEG
DOLBY DIGITAL

COAXIAL

OPTICAL

AUDIO

VIDEO

DIGITAL OUT

LINE OUT

S VIDEO

OUT

COMPONENT

VIDEO OUT

B-2

B-1

PCM/DTS/MPEG
DOLBY DIGITAL

COAXIAL

OPTICAL

DIGITAL OUT

AUDIO

VIDEO

LINE OUT

CD/DVD player

Stereo amplifier (receiver)

MD deck/DAT deck

Front (L)

Front (R)

[Speakers]

(white)

(red)

(white)

Coaxial digital
cord (not supplied)

Stereo audio cord
(not supplied)

to audio input

to coaxial or optical
digital input

Optical digital cord
(not supplied)
Remove jack cap
before connecting

to LINE OUT L/R (AUDIO) 1 or 2

to DIGITAL OUT
(COAXIAL or OPTICAL)

: Signal flow

B-1

B-2

ook

up
s

Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro

Logic) decoder and 3 to 6 speakers

You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use

. If your amplifier

(receiver) has a digital input jack, use

Note

When connecting 6 speakers, replace the monaural
rear speaker with a center speaker, 2 rear speakers
and a subwoofer.

C-1

C-2

PCM/DTS/MPEG
DOLBY DIGITAL

COAXIAL

OPTICAL

AUDIO

VIDEO

DIGITAL OUT