63
Advanced operations
Connecting the external microphone with the
XLR connector
When using the ECM-670 external microphone (not supplied), attach the CAC-12
microphone holder (not supplied) and supplied XLR adaptor.
(
1
)
Attach the XLR adaptor to the accessory shoe on the camcorder and tighten the
screw of the XLR adaptor.
(
2
)
Attach the microphone holder with the supplied screws.
(
3
)
Loosen the microphone holder screw and open the cover.
(
4
)
Place the microphone into the holder, close the cover, and tighten the screw.
(
5
)
Connect the microphone to the MIC IN connector on the XLR adaptor, using a
microphone cable (not supplied).
(
6
)
Set the +48V switch to ON.
To use the LEVEL selector
Set this selector to appropriate positions according to your conditions.
STD: Normally, set to this position.
ATT: When the sound level to be recorded is too high. This reduces the sound level.
GAIN: When using a low-sensitivity microphone, or when the sound level is too low.
Notes
• When you use a wind screen other than the one supplied with ECM-670, make sure that
the wind screen does not appear on the screen, using an underscan monitor.
• When detaching the microphone cable, do so while holding the PUSH button down.
• When detaching the XLR adaptor, do so after having loosened the screw of the XLR
adaptor.
+48V
Attach the holder
so that the moving
part is on top.
1
2
3
4
5
6
