Using the menu system
13
Using the menu system
DST-HD500 2-663-710-
11
(2)
Install menu
The
Install
menu allows you to tune in new channels automatically or
manually, and set a parental rating for programs.
1
Press the
MENU
button to display the menu system.
2
Press the
v
button to highlight the
symbol. Press the
b
or
OK
button to display the
Install
menu.
Full Scan
All the available channels were captured and stored when the
receiver was first installed. This option allows you to repeat that
process, searching for all available channels.
With the
Full Scan
option highlighted, press the
b
or
OK
button to
scan. For further instructions, please refer to the ‘Easy Setup
procedure’ on page 11.
Quick Scan
All the available channels were captured and stored when the
receiver was first installed. This option allows you to repeat that
process, searching for all the expected channels in your area.
With the
Quick Scan
option highlighted, press the
b
or
OK
button to
scan. For further instructions, please refer to the ‘Easy Setup
procedure’ on page 11.
Manual Scan
This option allows you to manually capture and store channels. Due
to the technical nature of the settings, it is recommended that only
experienced service personnel use this option.
Program Edit
This option allows you to edit the program list.
With the
Program Edit
option highlighted, press the
b
or
OK
button
to confirm. Press the
V
or
v
button to highlight the required setting
(refer to table below). Press the
OK
button to confirm.
Skip
This option allows you to skip unwanted
programs as you move through the channels by
pressing
PROG +/-
buttons.
With the
Skip
option highlighted, press the
b
or
OK
button to confirm. Press the
V
or
v
buttons to
highlight the program to be skipped, then press
the
OK
button. Press the
V
or
v
button to ‘On’. To
cancel the skip channel, set it back to ‘Off’. Press
the
OK
button to confirm.
Program Sorting
This option allows you to set the program list
sequence to your preference.
With the
Program Sorting
option highlighted,
press the
b
or
OK
button to confirm. Press the
V
or
v
buttons to highlight the program you want to
move and press the
OK
button. Press the
V
or
v
buttons to shift it to the new position. Press the
OK
button to confirm.
Favorite Preset
This option allows you to preset
Favorite List 1
and
Favorite List 2
.
With the
Favorite Preset
option highlighted, press the
b
or
OK
button. Press the
V
or
v
button to choose
Favorite List 1
or
Favorite
List 2
.
Setting favorite programs will give you easier access to the programs
you view most often.
In
Favorite List 1
or
Favorite List 2
, press the
V
or
v
buttons to
highlight the desired number, and then press the
OK
button. Press
the
V
or
v
buttons to choose the program you want to allocate. Press
the
OK
button to confirm.
Install menu
Install
Select :
Confirm :
EXIT :
BACK :
Full Scan
Quick Scan
Manual Scan
Program Edit
Favorite Preset
Searches all available channels, but takes a longer time.
continued...
DST-HD100A.book Page 13 Saturday, September 17, 2005 5:36 AM
