2-1
2. DISASSEMBLY
DSLR-A100_L2
DISCHARGING OF THE MAIN CAPACITOR UNIT
Before disassembly, be sure to discharge the main capacitor unit in the following manner.
SUBSIDIARY MATERIALS
G
: Grease
B
: Bond
G-15 (J-6082-619-A)
B-20 (Adhesive (LOCTITE 460)) (Note)
G-85 (J-6082-626-A)
B-50 (J-6082-615-A)
G-115 (J-6082-627-A)
B-60 (J-6082-616-A)
Short-circuit the capacitor using the discharger
or a resistor of about 200-300
Ω
/3W.
After discharge, check the voltage.
Note:
Use adhesive (LOCTITE 460) or an equivalent article.
Don’t use what becomes white after drying like a quick-
drying glue.
Содержание DSLR-A100
