DSC-HX60/HX60V
4-18
9. Install the Barrier Assy.
Note:
For assembling the Barrier Assy, refer to “(1) Ornamental Ring A or Barrier Assy Replacing Method”.
10. Turn the rear edge of Core Unit_3 counterclockwise to set the Core Unit_2 in the retracted state.
Barrier Assy
Barrier Ring
Rear edge of
Core Unit_3
Core Unit_2
Barrier Assy
Note
For assembling the Ornamental Ring A
and the Barrier Assy, refer to "(1)
Ornamental Ring A or Barrier Assy
Replacing Method".
11. While matching the concave of the Drive Gear Barrel Assy with the diamond mark on the Linear Motion Cam Barrel, insert the Linear
Motion Cam Barrel into the Drive Gear Barrel Assy.
12. Turn the Linear Motion Cam Barrel until the gear end of the Drive Gear Barrel Assy and the semicircular cutout of the Linear Motion Cam
Barrel come to the position shown below.
Linear Motion Cam Barrel
Diamond mark
Match the gear end of the Drive Gear Barrel Assy with
the semicircular cutout of the Linear Motion Cam Barrel.
Concave
Drive Gear Barrel Assy
