Sony DPP-MS300 Marketing, Руководство по обслуживанию

Страница: 24 / 88

4-5
[D/A Output CHROMA Level Adjustment] (DK-40 board)
Adjustment Procedure:
(1)
Adjust RV402 so that the
A
level (Red) of waveform on the
oscilloscope satisfies the specification value.
(2) Turn off the power switch.
Fig. 4-8
[A/D Input Y Level Adjustment] (DK-40 board)
Note: Turn off the power switch once, then turn it on again.
Adjustment Procedure:
(1)
Connect on oscilloscope to the CL409 (from IC407
^¢
pin
to the point via R478).
(2) Adjust RV404 so that the
A
level (white) of waveform on
the oscilloscope satisfies the specification value.
Fig. 4-9
Mode VIDEO Input
Signal Color bar (S-VIDEO IN)
Measuring point CL409
Measuring equipment Oscilloscope
Adjustment part RV404
Specification value 1.05 ± 0.03 Vp-p
[A/D Input R-Y/B-Y Level Adjustment]
(VI-40, DK-40 board)
Adjustment Procedure:
(1)
Connect on oscilloscope to the CL408.
(2) Adjust RV105 so that waveform to be Fig. 4-10.
Fig. 4-10
(3) Adjust RV106 so that the
A
level (B-Y) of waveform on the
oscilloscope satisfies the specification value.
Fig. 4-11
(4) Connect on oscilloscope to the CL407.
(5) Adjust RV405 so that the
A
level (R-Y) of waveform on the
oscilloscope satisfies the specification value.
Fig. 4-12
Mode VIDEO Input
Signal Color bar (S-VIDEO IN)
Measuring point CL407, 408
Measuring equipment Oscilloscope
Adjustment parts RV105, 106, 405
Specification value
CL407 (R-Y) 1.03 ± 0.02 Vp-p
CL408 (B-Y) 1.30 ± 0.02 Vp-p
Red
Yellow
A
Mode VIDEO Input
Signal Color bar (VIDEO IN)
Measuring point J1802 (OUTPUT)
Measuring equipment Oscilloscope
Adjustment part RV402
Specification value 672 ± 15 mVp-p
Red
A
H
White (75%)
H
A
A B C
Yellow
C 1/4A
B 2/3A
Blue
Yellow
A