66
Timer-recording radio
programmes (continued)
Connecting optional
components
Connecting optional A/V
components
To enhance your system, you can connect optional
components. Refer to the operating instructions of
each component.
Connecting audio components
Connecting a tape deck for
analogue recording
You can connect a tape deck to the system with
commercially available audio cords. Be sure to
match the colour-coded pins to the appropriate
jacks.
To the audio output
on the tape deck
To the audio input on
the tape deck
To check the setting
1
Press TIMER SELECT.
2
Press
V
or
v
to select “SEL MD REC”, then
press ENTER.
To cancel the timer
Press TIMER SELECT and press
V
or
v
to select
“TIMER OFF”, then press ENTER.
Notes
• If the system is on at the preset time, the recording
will not be made.
• The volume is reduced to minimum during
recording.
• You cannot activate DAILY 1 and DAILY 2 at the
same time.
• When you use the recording timer at the same time
as the Sleep Timer, the Sleep Timer setting has
priority.
• Do not operate the system from the time the system
turns on until the recording starts (about 30 seconds
before the preset time).