11
Getting Started/Basic Operations
Tips
• Pressing CD
H
when the system is off
automatically turns on the system and starts CD
play if there is a CD on the disc tray (
One Touch
Play
).
When the system is in the Power Saving Mode, the
One Touch Play function does not work.
• You can switch from another source to the CD
player and start playing a CD just by pressing CD
H
or the DISC 1 – 5 (
Automatic Source
Selection
).
• If there is no CD in the player, “CD No Disc”
appears in the display.
Note
Do not push the disc tray to close it, as this may
damage the CD player. Press CD 1 – 5
A
to close the
disc tray.
2
Press one of the DISC 1 – 5.
The disc tray closes and play starts.
If you press CD
H
, play starts from the CD
loaded on the tray whose number appears in
the display.
Disc tray number
Playing time
1
Track number
To
Do this
Stop play
Press CD
s
.
Pause
Press CD
S
. Playing time
starts flashing. Press again to
resume play.
Select a track
During play or pause, turn the
jog dial clockwise (to go
forward) or counterclockwise
(to go back) and release it
when you reach the desired
track.
Find a point in
a track
Press and hold down CD
m
or
M
during play and
release it at the desired point.
Press PLAY MODE
repeatedly in stop mode until
“1 DISC” appears.
Play all CDs
Press PLAY MODE
repeatedly in stop mode until
“ALL DISCS” appears.
Remove the CD
Press one of the CD 1 – 5
A
.
Select a CD in stop
mode
Play only the CD
you have selected
Change other CDs
while playing a CD
Press one of the CD 1 – 5
A
to open the tray that contains
the CD that you want to
change. When you change the
CD, press the same button to
close the tray. While the tray
is open, the DISC 1 – 5
indicator for that tray flashes
orange.
Adjust the volume
Turn VOLUME.
Press one of the DISC 1 – 5
(or press D.SKIP on the
remote).