35
The MD Deck
—
Recording
4
Turn MD JOG until “T.Mark Off”
appears, then press ENTER/YES.
5
Turn MD JOG until “T.Mark LSync”
appears, then press ENTER/YES.
“L-SYNC” lights up.
6
Press MENU/NO.
7
Press MD
S
.
Recording starts.
To stop recording
Press MD
s
.
To change the trigger level for
Level Synchro Recording
Do the procedure below to change the signal level
that triggers Level Synchro Recording.
1
Press MENU/NO during recording pause.
“Setup?” appears, then press ENTER/YES.
2
Turn MD JOG until “LS(T)” appears, then
press ENTER/YES.
3
Turn MD JOG to select the level, then press
ENTER/YES.
You can set the level at any value between
–72 dB and 0 dB, in 2 dB steps. When you
press CLEAR, the volume returns to the factory
setting (–50 dB).
4
Press MENU/NO.
To cancel automatic track
marking
1
Press MENU/NO during recording pause.
“Setup?” appears, then press ENTER/YES.
2
Turn MD JOG until “T.Mark LSync” appears,
then press ENTER/YES.
3
Turn MD JOG until “T.Mark Off” appears, then
press ENTER/YES.
4
Press MENU/NO.
“L-SYNC” disappears.
When “L-SYNC” is off, a track number is marked
only at the beginning of each recording.
Marking track numbers at a
specific point during
recording
— Track Mark
You can mark track numbers at any time during
recording, regardless of the type of sound source.
2
1
3
4
5
REC/REC IT
,
Press REC/REC IT during recording at
the point you want to add a track mark.
The tracks following the added one are
renumbered.