1-3
DFR-E3000
1-1. Installation
Rear bracket
Front bracket
Outer rail
Required parts
.
Rack Mount Rail, RMM-30
Rail with bracket:
2 pcs.
Screw (B5
x
8):
8 pcs.
.
Screw for inner rail (B4
x
8)
(
*
1)
:
6 pcs.
.
Screw for rack mounting (RK5
x
16): 4 pcs.
(Sony part number: 7-682-378-04)
.
Washer for rack mounting:
4 pcs.
(Sony part number: 2-297-913-01)
(
*
1)
: The DFR-E3000 comes with the eight screws. The
two screws of them are spare.
n
Be sure to use the RMM-30 Rack Mount Rail.
If a rack mount rail other than the RMM-30 is used, the
DFR-E3000 may be dropped by insufficient strength of the
rack mount rail. This may cause a injury.
Procedures
1.
Turn the power off.
2.
Remove the four feet from the bottom of the DFR-
E3000.
3.
While pressing the stopper of the rail, pull out the
inner rail.
4.
Attach the inner rails to the DFR-E3000 using the six
screws (B4
x
8) supplied with the DFR-E3000.
5.
Loosen the screws fastening the rear bracket to the
outer rail, and adjust the position of the rear bracket
with the rack depth.
Stopper
Inner rail
Outer rail
Inner rail
Inner rail
B 4
x
8
B 4
x
8
Feet
BVTT 3
x
12
Feet
BVTT 3
x
12
