2-4 (E)
DEP-100
2-4. ISR
2-4-4. Functions of Commands
*
*
*
*
*
RST (Reset)
This command is used to reset the ISR processor (soft-
ware).
When reset processing is complete, the DEP-100 returns
“
*
ATN: OPC;”.
*
*
*
*
*
IDN? (Identify Query)
This command requests the identity information of the
DEP-100.
The DEP-100 returns the following responses.
Manufacturer:
SONY
Model:
DEP-100
Device ID:
Same data as that set for DEVID
command.
(If the device-id is not defied, the
DEP-100 returns “NONE”.)
Serial number:
Serial number of the DEP-100
(five digits)
Software version:
NONE
Virtual machine type: NONE
VM sub-address:
NONE
Destination:
NONE
ROM:
Board name, ROM name,
ROM version number
*
*
*
*
*
TST ###### (Test)
This command instructs the DEP-100 to execute the
specified self-diagnostics.
Test numbers and descriptions are as follows.
Test No.
Description
1
Initial Self-Diagnostics
2
VSW-45 board sense
3
SEC-39 board sense
4
Flash memory
It can be requested these self-diagnostics menus by using
“HELP: TST?” command.
When the self-diagnostics is complete, the DEP-100
returns “
*
ATN: OPC;”.
2-4-3. Supported Commands
The DEP-100 supports the following commands.
For more detailed information of each command, refer to
the ISR PROTOCOL manual.
Common Command
Description
*
RST;
Resets ISR software.
*
IDN?;
Requests id-data.
*
TST ######;
Instruct to execute self-diagnostics.
*
TST?;
Requests result of self-diagnostics.
*
FLAGS?;
Requests flag data.
*
STATUS?;
Requests general operation status.
*
CMDERR?;
Requests to read command error
queue.
*
MSG? #######;
Requests error/warning status and
detailed operation status.
Response
Description
*
ATN: OPC;
*
ATN: CMDERR;
*
ATN: QRESP;
SONY Private Command Description
HELP: TST?;
Requests test menu.
DEVID; device-id
Sets device-id.
LDSW TYPE; module
Downloads software.