1-10 (E)
DEP-100
7.
While pressing the stoppers of the inner rails, slide the
inner rails fully into the outer rails.
c
.
Be sure to mount the DEP-100 in the rack with two or
more persons.
Trying to handle this job by one-person could occur to
injury.
.
Be careful not to get caught your hand and finger in the
rack mount rail when installing the unit in the rack.
8.
After confirming that the DEP-100 can be moved
smoothly, tighten the screws (B5
x
8) secured tempo-
rarily in the step 6.
n
When securing the front brackets to the rack by
screws, pull out the DEP-100 about 20 cm (8 inches),
and fasten the screws of the front brackets to the rack.
9.
After installing the DEP-100 in the rack, secure the
unit to the rack by the prepared four screws (RK5
x
16) and four washers.
n
When the DEP-100 is mounted in a rack, the maximum
traveling distance is illustrated below.
132
66
581 (Maximum traveling distance)
Distance to the center of the slide rail
Height of the unit mounted in rack
Unit : mm
1-8. Rack Mounting
Rack
Stopper
Inner rail
Outer rail
RK5
x
16
Washers
Washers
Rack
RK5
x
16
