Sony DCR-TRV40, Руководство по обслуживанию

Страница: 123 / 165

5-49
DCR-TRV40/TRV40E/TRV50/TRV50E
3-2. SYSTEM CONTROL SYSTEM ADJUSTMENT
1. Initialization of 8, A, B, C, D, E, F, 1B, 1E, 1F Page
Data
If the 8, A, B, C, D, E, F, 1B, 1E, 1F page data is erased due to some
reason, perform “1-2. INITIALIZATION OF PAGE DATA” of “5-
1. CAMERA SECTION ADJUSTMENT”
Note: When reading or writing the 1B, 1E, 1F page data, select page: 0,
address: 10, and set data: 01, then select B, E or F page. The 1B. 1E
or 1F page can be chosen by this data setting.
After reading or writing, reset the data of page: 0, address: 10 to
“00”.
2. Touch Panel Adjustment
Adjust the calibration of the touch panel.
Mode VTR stop
Signal Arbitrary
Adjustment Page A
Adjustment Address 90 to 93
Note:
The data of page: 0, address: 10 must be “00”.
Adjusting method:
1) Select page: 7, address: 05, and set data: 01.
2) Using a stylus etc., push the center of “X” indicated in the part
A.
3) Using a stylus etc., push the center of “X” indicated in the part
B.
4) Using a stylus etc., push the center of “X” indicated in the part
C.
5) Select page: 7, address: 05, and set data: 00.
Fig. 5-3-4.
A
C
B