28
(
7
)
Tap [Passkey].
The character input screen appears.
,
(
8
)
Enter the passkey.
For details of how to input characters, see “How to input characters” (p. 9).
For example, when using the BTA-NW1/BTA-NW1A Modem Adaptor, the
passkey is the same as its serial number indicated on the label on the rear
panel.
Tip on “Passkey”
The passkey is an identification number needed to allow two Bluetooth
devices to communicate with each other. The connection is permitted after you
enter the passkey. This “Passkey” is sometimes referred to as the “Bluetooth
passkey”, “PIN”, “Bluetooth PIN”, etc. For details, refer also to the operating
instructions supplied with the modem adaptor.
(
9
)
Tap [Enter].
When registration is complete, the Bluetooth Setup screen appears again and
the message “Bluetooth Registration Complete” appears.
(10)
Tap [OK].
MODEM ADAPTOR WITH BLUETOOTH
TM
FUNCTION
MODEL NO.
BTA-NW1
®
Passkey
The number used when registering a
Bluetooth device
Registering Bluetooth devices