6-43
DCR-SR32E/SR33E/SR42/SR42A/SR42E/SR52E/SR62/SR62E/SR72E/SR82/SR82C/SR82E_ADJ
4) If the
[End]
button is clicked, the following screen is displayed
during the execution of “4. Transmissive Mode White Balance
Adj.”. Check that the LCD screen is not colored. If colored,
using the
[Up]
/
[Down]
button on the screen, adjust so that the
LCD screen is not colored. After the adjustment, click the
[End]
button in the screen.
5) If the
[End]
button is clicked, “5. Reflective Mode White Bal-
ance Adj.” will be executed.
6) Upon successful completion of the “5. Reflective Mode White
Balance Adj.”, “6. Release of Data Setting during LCD Adj.”
will be executed.
7) Upon successful completion of all item the LCD Adjustment,
the following message is displayed. Click the
[OK]
button.
3.
LCD Adjustment
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during LCD Adj.
2. LCD Automatic Adj.
(VCO Adj., Contrast Adj.)
3. V-COM Adj.
4. Transmissive Mode White Balance Adj.
5. Reflective Mode White Balance Adj. (MEGA model only)
6. Release of Data Setting during LCD Adj.
[Adjusting method]
1) Click the
[Start]
button of the LCD Adjustment.
2) The Automatic Adjustment Program executes the “1. Data
Setting during LCD Adj.” and “2. LCD Automatic Adj.”.
3) After that, the following screen is displayed during the execu-
tion of “3. V-COM Adj.”. Using the
[Up]
/
[Down]
button on the
screen, adjust so that the brightness of portions A and B on the
LCD panel is equal. After the adjustment, click the
[End]
but-
ton in the screen.
