6-15
DCR-SR32E/SR33E/SR42/SR42A/SR42E/SR52E/SR62/SR62E/SR72E/SR82/SR82C/SR82E_ADJ
1-6.
VIDEO SYSTEM ADJUSTMENTS
1.
Function of Each Button on Video System Adjust-
ment Screen
Click the
[VIDEO SYSTEM ADJUSTMENT]
button on the Main
Menu screen, and the “VIDEO SYSTEM ADJUSTMENT”
screen in Fig. 6-1-9 will appear.
Fig. 6-1-9
1
[To Menu]
button
The Main Menu screen comes back.
2
[Preparation]
button
Notes for adjustment or jigs used are displayed.
3
[Start]
button
“Video Adjustment” starts.
4
[Release Data Setting]
button
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the video adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)
2.
Adjustment Items of VIDEO System Adjustment
The adjustment items of video system adjustment are as listed in
Table 6-1-4. The Automatic Adjustment Program executes the ad-
justment items if the VIDEO Adjustment Start button is clicked.
Note:
The Automatic Adjustment Program does not support.
Table 6-1-4
4
3
2
1
Block
Page
Address
(Note)
Origin Oscillation
Check
R2108 (Pin B3 of IC2101)
on VC-489 board
Frequency
counter
-
-
-
S VIDEO OUT Y
Level Adj.
Y signal terminal of S VIDEO plug of
A/V jack (75 ohm terminated)
Oscilloscope
10
60
4400
S VIDEO OUT
Chroma Level Adj.
Chroma signal terminal of S VIDEO
plug of A/V jack (75 ohm terminated)
Oscilloscope
10
60
4401, 4402
VIDEO OUT Level
Check
VIDEO terminal of A/V jack (75 ohm
terminated)
Oscilloscope
-
-
-
Button
Name
Adjustment
Measurement Point
Measuring
Instrument
Adjusting Address
VIDEO
Adjustment
