Sony DCR-PC350 - Digital Handycam Camcorder, Руководство по обслуживанию

Страница: 133 / 218

6-50
DCR-PC350/PC350E
3-2. SYSTEM CONTROL SYSTEM ADJUSTMENT
1. Initialization of 8, A, B, C, D, E, F, 14, 18, 19, 1A, 1B, 1C,
1E, 1F Page Data
If the 8, A, B, C, D, E, F, 14, 18, 19, 1A, 1B, 1C, 1E, 1F page data
is erased due to some reason, perform “1-2. INITIALIZATION OF
8, A, B, C, D, E, F, 14, 18, 19, 1A, 1B, 1C, 1E, 1F PAGE DATA” of
“6-1. CAMERA SECTION ADJUSTMENT”
Note: When reading or writing the 14, 18, 19, 1A, 1B, 1C, 1E, 1F page
data, select page: 0, address: 10, and set data: 01, then select 4, 8, 9,
A, B, C, E or F page. The 14, 18, 19, 1A, 1B, 1C, 1E or 1F page can
be chosen by this data setting.
After reading or writing, reset the data of page: 0, address: 10 to
“00”.
2. Touch Panel Adjustment
Adjust the calibration of the touch panel.
Mode PLAY/EDIT (VTR stop)
Signal Arbitrary
Adjustment Page A
Adjustment Address 90 to 93
Note1: This adjustment should be carried out upon completion of the LCD
system adjustments.
Note2: Perform this adjustment with observing the screen from the front.
Note3:
Check that a Memory Stick Duo is not inserted.
Note4: Check that the LCD panel is not reverse mode.
Note5: The data of page: 0, address: 10 must be “00”.
Preparation:
Order Page Address Data Procedure
1 5 01 01 Set the data.
2 5 05 00 Set the data.
3 5 06 C7 Set the data.
4 5 07 00 Set the data.
5 5 08 00 Set the data.
6 5 09 00 Set the data.
7 5 0A FF Set the data.
8 5 0B 00 Set the data.
9 5 0C 00 Set the data.
10 5 0D 00 Set the data.
11 5 0E 01 Set the data.
12 5 00 01 Set the data, and press PAUSE
button.
13 Check that the touch panel
adjustment screen is displayed.
(Fig. 6-3-4.)
14 Perform “Adjusting method”.
Adjusting method:
1)
Using a stylus, push the center of “X” indicated in the part A.
2) Using a stylus, push the center of “X” indicated in the part B.
3) Using a stylus, push the center of “X” indicated in the part C.
A
C
B
Fig. 6-3-4.