Sony DCR-PC350 - Digital Handycam Camcorder, Руководство по обслуживанию

Страница: 109 / 218

6-26
DCR-PC350/PC350E
7. Flange Back Adjustment (Using Flange Back
Adjustment Chart and Subject More Than 500m Away)
The inner focus lens flange back adjustment is carried out
automatically. In whichever case, the focus will be deviated during
auto focusing/manual focusing.
7-1. Flange Back Adjustment (1)
Subject Flange back adjustment chart
(2.0 m from the front of the protection
glass)
(Luminance: 350
±
50 lux)
Measurement Point Adjustment remote commander
Measuring Instrument
Adjustment Page F
Adjustment Address 48 to 58
Specified Value Data of page: F, address: 57 is “00” to
“09”.
Data of page: 6, address: 0C is “00”.
Note1:
This adjustment should be carried out upon completion of the
following adjustments.
“HALL Adjustment”, “MR Adjustment”
“CCD Output 2ch Matching Adjustment”
Note2: Make the lens horizontal and perform this adjustment.
Note3:
The data of page: 0, address: 10 must be “00”.
Note4: Check that the data of page: 6, address: 02 is “00”. If not, turn off
the power and turn on again.
Switch setting:
1)
POWER ....................................................... CAMERA-TAPE
2) NIGHT SHOT .................................................................. OFF
3) COLOR SLOW SHUTTER (CAMERA SET menu) ...... OFF
Preparations:
1)
Check that at both the zoom lens TELE end and WIDE end,
the center of the chart for the flange back adjustment and center
of the exposure screen coincide.
Adjusting method:
Order Page Address Data Procedure
1 0 01 01 Set the data.
2 6 01 13 Set the data, and press PAUSE
button.
3 Wait for 2 sec.
4 6 01 15 Set the data, and press PAUSE
button.
5 6 02 Check that the data changes to
“01”. (Note5)
6 6 0C Check that the data is “00”.
7 F 57 Check that the data is “00” to “09”.
Note5: The adjustment data will be automatically input to page: F, address:
48 to 58.
Processing after Completing Adjustments:
Order Page Address Data Procedure
1 6 01 00 Set the data, and press PAUSE
button.
2 6 01 25 Set the data, and press PAUSE
button.
3 6 01 00 Set the data, and press PAUSE
button.
4 0 01 00 Set the data.
5 Perform “Flange Back
Adjustment (2)”
7-2. Flange Back Adjustment (2)
Perform this adjustment after performing “Flange Back Adjustment (1)”.
Subject Subject more than 500m away
(Subjects with clear contrast such as
buildings, etc.)
Measurement Point Check operation on TV monitor
Measuring Instrument
Adjustment Page F
Adjustment Address 48 to 58
Note1:
Make the lens horizontal and perform this adjustment.
Note2: The data of page: 0, address: 10 must be “00”.
Note3:
Check that the data of page: 6, address: 02 is “00”. If not, turn off
the power and turn on again.
Switch setting:
1)
POWER ....................................................... CAMERA-TAPE
2) NIGHT SHOT .................................................................. OFF
3) COLOR SLOW SHUTTER (CAMERA SET menu) ...... OFF
Preparations:
1)
Set the zoom lens to the TELE end and expose a subject that is
more than 500m away (subject with clear contrast such as
building, etc.). (Nearby subjects less than 500m away should
not be in the screen.)
Adjusting method:
Order Page Address Data Procedure
1 0 01 01 Set the data.
2 6 01 13 Set the data, and press PAUSE
button.
3 Wait for 2 sec.
4 Place a ND filter on the lens so
that the optimum image is obtain.
5 6 01 29 Set the data, and press PAUSE
button.
6 6 02 Check that the data changes to
“01”. (Note4)
Note4:
The adjustment data will be automatically input to page: F, address:
48 to 58.
Processing after Completing Adjustments:
Order Page Address Data Procedure
1 6 01 00 Set the data, and press PAUSE
button.
2 6 01 25 Set the data, and press PAUSE
button.
3 6 01 00 Set the data, and press PAUSE
button.
4 0 01 00 Set the data.
5 Perform “Flange Back Check”