Sony DAV-DZ870KW, Руководство по эксплуатации

Страница: 81 / 128

Contr
o
l f
o
r HDMI/
Extern
al A
u
dio
D
e
vic
e
81
GB
Sound transmission is established as
follows (example):
Tip
• To confirm the current ID, perform Steps 1 to 7
above. When you pair the unit with the S-AIR sub
unit (page 82), [(PAIRING)] appears beside ID on
the display for selecting ID.
To set the ID of the surround
amplifier
1
Make sure that the SURROUND
SELECTOR switch of the surround
amplifier is set to SURROUND.
2
Set the S-AIR ID switch of the surround
amplifier to match the ID (A, B, or C) of
the unit.
3
Press POWER on the surround
amplifier.
When sound transmission is established,
the POWER / ON LINE indicator of the
surround amplifier turns green.
For details of the POWER / ON LINE
indicator, see “To check the transmission
status” (page 27).
To set the ID of the S-AIR
receiver
Refer to the operating instructions of the S-AIR
receiver.
Note
• It is easy to set the same ID for the unit and S-AIR sub
unit to establish sound transmission. However,
neighbors may also receive your system’s sound if
IDs are the same, or you may receive the sound from
neighbors. To prevent this, you can identify the unit
with a specific S-AIR sub unit by performing the
pairing operation (page 82).
You can enjoy the system’s sound by using the
S-AIR receiver. The S-AIR receiver can be
installed anywhere, regardless of the location of
the unit, for enjoying the system’s sound in
another room.
For details of the S-AIR receiver, refer to the
operating instructions of the S-AIR receiver.
1
Set the ID of the S-AIR receiver to that
of the unit.
• To set the ID of the unit, see “To set the ID
of the unit” (page 80).
• To set the ID of the S-AIR receiver, refer
to the operating instructions of the S-AIR
receiver.
Note
• When you are using another S-AIR sub unit,
such as a surround amplifier, do not change the
ID of the unit. Set the ID of the S-AIR receiver
to the same ID as the unit.
• When you pair the unit and another S-AIR sub
unit, such as a surround amplifier, by the pairing
operation, you need to perform the pairing
operation between the unit and the S-AIR
receiver. For details, see “Identifying the unit
with a specific S-AIR sub unit (Pairing
operation)” (page 82).
2
Select the desired function on the
S-AIR receiver.
The function changes in the same sequence
as you press FU/– (page 32).
3
Adjust the volume on the S-AIR
receiver.
Note
• When the sound is other than 2 channel stereo, multi
channel sound is downmixed to 2 channel.
• The sound of the S-AIR receiver may be cut off by
operation of the unit.
This unit
S-AIR sub unit
ID A
S-AIR sub unit S-AIR sub unit
ID A ID A ID B
ID B
Other S-AIR main
unit
Enjoying the system’s sound in
another room
For the S-AIR receiver