Sony DAV-DZ870KW, Руководство по эксплуатации

Страница: 112 / 128

112
GB
Center (SS-CT81)
Speaker system Full range, Magnetically
Shielded
Speaker unit 30 mm × 60 mm cone type
Rated impedance 3 ohms
Dimensions (approx.) 385 mm × 50 mm × 67 mm
(w/h/d)
Mass (approx.) 0.4 kg
Surround (SS-TS84)
Speaker system Full range Bass reflex,
Magnetically Shielded
Speaker unit 65 mm cone type
Rated impedance 3 ohms
Dimensions (approx.) 113 mm × 830 mm × 84
mm (w/h/d)
315 mm × 1,015 mm -
1,335 mm × 315 mm (w/h/
d) with stand
Mass (approx.) 1.7 kg
3.6 kg with stand
Subwoofer (SS-WS85)
Speaker system Subwoofer Bass reflex
Speaker unit 160 mm cone type
Rated impedance 1.5 ohms
Dimensions (approx.) 225 mm × 395 mm × 325
mm (w/h/d)
Mass (approx.) 6.1 kg
General
Power requirements 220 V - 240 V AC,
50/60 Hz
Power consumption On: 130 W
Standby: 0.3 W (at the
Power Saving mode)
Output voltage (DIGITAL MEDIA PORT)
DC 5 V
Output current (DIGITAL MEDIA PORT)
700 mA
Dimensions (approx.) 430 mm × 66 mm × 385
mm (w/h/d) incl.
projecting parts
430 mm × 66 mm × 415
mm (w/h/d) with the
wireless transceiver
inserted
Mass (approx.) 4.3 kg
Surround amplifier (TA-SA100WR)
Amplifier Section
Stereo mode (rated)
80 W + 80 W (at 3 ohms, 1
kHz, 1 % THD)
Surround mode (reference) RMS output power
143 W (per channel at 3
ohms, 1 kHz, 10 % THD)*
* Depending on the source, there may be no sound
output.
Rated impedance: 3 - 16
Ω
General
Power requirements
220 V - 240 V AC,
50/60 Hz
Power consumption On: 50 W
Dimensions (approx.) 85 mm × 100 mm × 330
mm (w/h/d) (incl. EZW-
RT10)
85 mm × 100 mm × 345
mm (w/h/d) incl. speaker
cord cover and speaker
cord holder
Mass (approx.) 1.7 kg incl. speaker cord
cover and speaker cord
holder
Wireless transceiver (EZW-RT10)
Communication system S-AIR Specification
version 1.0
Output 12.0 mW
Frequency band 2.4000 GHz - 2.4835 GHz
Modulation method DSSS
Power requirements DC 3.3 V, 350 mA
Dimensions (approx.) 50 mm × 13 mm × 60 mm
(w/h/d)
Mass (approx.) 24 g
Design and specifications are subject to change
without notice.
• Standby power consumption 0.3 W.
• Halogenated flame retardants are not
used in the printed wiring boards.
• Over 85% power efficiency of
amplifier block is achieved with the
full digital amplifier, S-master.