Ge
tting Star
te
d
35
GB
• Use screws suitable for the material and strength of
the wall.
• Do not install the IR transmitter or IR receiver to a
wall of low strength.
• Sony is not liable for any damage or accident incurred
by incorrect installation (i.e. low strength wall, etc.),
incorrect use of this product, or natural disaster.
• When connecting/disconnecting cords, detach the IR
transmitter or IR receiver from the wall first.
Follow the steps below to make the minimum
number of basic adjustments for using the
system.
To skip an adjustment, press
>
. To return to
the previous adjustment, press
.
.
1
Turn on the TV.
2
Press
[
/
1
.
• Disconnect the headphone when you perform
the Quick Setup. You cannot operate steps after
10 with the headphone connected.
• Make sure that the function is set to “DVD.”
3
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
[Press [ENTER] to run QUICK SETUP.]
appears at the bottom of the screen. If this
message does not appear, display the Quick
Setup and perform again (page 37).
• When you press CLEAR in message, the
message disappears. When you need to perform
the Quick Setup, see “To recall the Quick Setup
display” (page 37).
4
Press ENTER without inserting a disc.
Note
Troughs
Stand
Step 8: Performing the
Quick Setup
Note
Note
"
/
1
.
/
>
X
/
x
ENTER
CLEAR
continued
