DAV-DZ350/DZ650/DZ950
8
2-5. FRONT PANEL BLOCK
7
six claws
7
five claws
0
front panel block
2
connector
(CN201)
5
BT antenna
connector
(SMC600)
4
Remove the bond.
3
connector
(CN202)
6
two claws
1
Cut two wire ties.
– Rear view –
tray
Wire setting
wire tie
claw
claw
wire tie
MAIN board
POWER board
DVD mechanism deck
(CMS-LS5FP)
Check that this portion is not slack.
This portion must not touch the POWER board.
This portion must not touch the tray.
Bring the slack part to the front side.
Note 1:
In reassembling,
use new wire tie
to fasten the clamp
same as before.
8
Remove the front panel block
in the direction of an arrow.
9
Draw out two wires.
9
Draw out the wire.
Note 2:
When you install the connector, please install them correctly.
There is a possibility that this machine damages when not
correctly installing it.
Insert is shallow
Insert is straight
to the interior.
connector
Insert is incline
connector
connector
connector
connector
connector
NG
OK
NG