1-14
PCM-3348HR
1-8. Installation of the DABK-3343HR
The DABK-3343HR comprises the following;
DAD-30 board:12
n
Turn OFF the POWER switch of PCM-3348HR.
Procedure
(1) Open the front door, remove six screws fixing the
blank panel.
(2) Insert the twelve DAD-30 boards into the slot accord-
ing to the board indication(DAD-1 to DAD-12) on
boards and the PCM-3348HR, and close the lock
levers.
(3) Fix the board with the two fixing screws.
Fixing screws
Blank panel
Fixing screw
Lock Iever
Board indication
(DADx)
1-8. Installation of the DABK-3343HR
1-9. Installation of the Shield Panel (For CE only)
1-9. Installation of the Shield Panel
(For CE only)
Since the shield cover is attached to the PCM-3348HR CE
model in order to satisfy the performance of unit under the
heavy electromagnetic field.
When using the unit, be sure to attach the shield cover in
accordance with the following procedure.
Procedure
(1) Load the tape.
(2) Attach the shield cover by aligning the four corners to
the transport table.
n
.
Always put the shield cover to the transport table
completely before starting operation.
.
The shield cover should be put on or took off under the
condition of “Tape unloaded”.
Shield cover
Transport table
Front side
Shield cover
Transport table
