background image

– 6 –

Note :

The error  code is cleared if the battery is removed, except defective
flash, unit.

*1 : The error display is given in two ways.
*2 : When the flash charging failed, Page:D, Address:C7, Data:04 are

written.
After repair, be sure to write Page:D, Address:C7, Data:00.

Self-diagnosis display

• C: 

ππ

ππ

You can reverse the camera
malfunction yourself. (However,
contact your Sony dealer or local
authorized Sony service facility
when you cannot recover from the
camera malfunction.)

• E: 

ππ

ππ

Contact your Sony dealer or local
authorized Sony service facility.

[Description on Self-diagnosis Display]

Display Code

  C:04:

ππ

  C:32:

ππ

  C:13:

ππ

  E:61:

ππ

  E:91:

ππ

Countermeasure

Use a NP-FS11/F10 battery pack.

Turn the power off and on again.

Format the “Memory stick”.

Insert a new “Memory Stick”.

Checking of lens drive circuit.

Cause

You are using a basttery pack that is not an
“InfoLITHIUM” battery pack.

Trouble with hardware.

Unformatted memory stick is inserted.

Memory stick is broken.

When failed in the focus and zoom
initialization.

Abnormality when flash is being
charged.

Checking of flash unit or replacement
of flash unit.

Caution Display During Error

for “InfoLITHIUM” BATTERY
ONLY

SYSTEM ERROR

FORMAT ERROR

MEMORY STICK ERROR

 *1

 *2

Содержание Cyber-shot DSC-F505


































































































































Отзывы: