12
1
Turn FUNCTION (or press FUNCTION
on the remote repeatedly) until “CD”
appears in the display.
2
Press PLAY MODE repeatedly until
“PGM” appears in the display.
3
Press CD
.
/
>
repeatedly until the
desired track number appears in the
display.
3 243
PGM
4
Press PLAY MODE.
The selected track is programmed.
The selection number appears in the
display.
5
To program additional tracks, repeat
steps 3 and 4.
6
Press CD
u
(or
N
on the remote).
To
Cancel Program Play
Add a track to the end
of the program
Erase the entire
program
Tips
• The program you made remains after Program Play
finishes. To play the program again, switch the
function to CD, and then press CD
u
(or
N
on
the remote).
• “--.--” appears in the display when the total program
time exceeds 100 minutes.
Using the VIDEO CD/CD
display
Press DISPLAY on the remote repeatedly.
The display changes as follows:
During normal playback
Current track number and elapsed playing time
of the track
t
Current track number and
remaining playing time of the track
t
Remaining playing time of the entire CD/
VIDEO CD
t
Clock display
t
Current track
number and elapsed playing time of the track
t
......
(VIDEO CD with PBC functions (Ver. 2.0))
Elapsed playing time of the current track*
y
Clock display
* This may not appear when displaying still images,
etc.
While the VIDEO CD/CD is stopped
Total number of tracks and total playing time
t
Clock display
t
Current source display
t
Total number of tracks and total playing time
t
......
Note
If the CD/VIDEO CD contains 21 tracks or more, the
remaining playing time of the current track will
appears as “--.--” for each track starting with the 21st.
Programming the CD/VIDEO CD
tracks (continued)
Do this
Press PLAY MODE
repeatedly until “PGM”
disappears from the display.
Do steps 3 and 4 with
Program Play stopped.
Press CD
x
with Program
Play stopped.
Selected track
number
Total playing time