background image

CMT-SBT100/SBT100B (GB)  4-464-274-

13

 (2)

WARNING

To reduce the risk of fire, do not cover the 

ventilation opening of the appliance with 

newspapers, tablecloths, curtains, etc.
Do not expose the appliance to naked flame 
sources (for example, lighted candles).
To reduce the risk of fire or electric shock, do not 
expose this appliance to dripping or splashing, 
and do not place objects filled with liquids, such 
as vases, on the appliance.
Do not install the appliance in a confined space, 
such as a bookcase or built-in cabinet.
As the main plug is used to disconnect the unit 
from the mains, connect the unit to an easily 
accessible AC outlet. Should you notice an 
abnormality in the unit, disconnect the main plug 
from the AC outlet immediately.
Do not expose batteries or appliances with 
battery-installed to excessive heat, such as 
sunshine and fire.
The unit is not disconnected from the mains as 
long as it is connected to the AC outlet, even if the 
unit itself has been turned off.
Excessive sound pressure from earphones and 
headphones can cause hearing loss.
This equipment has been tested and found to 
comply with the limits set out in the EMC Directive 
using a connection cable shorter than 3 meters.

CAUTION

The use of optical instruments with this product 
will increase eye hazard.

This appliance is 
classified as a CLASS 
1 LASER product. This 
marking is located on 
the rear exterior of the 
unit.

For customers in Australia

This equipment should be installed and operated 
with at least 20 cm and more between the 
radiator and person’s body (excluding extremities: 
hands, wrists, feet and ankles).

For customers in Europe

Properly shielded and grounded cables and 
connectors must be used for connection to host 
computers and/or peripherals.

Notice for customers: the following 

information is only applicable to 

equipment sold in countries applying 

EU directives.

This product has been manufactured by or on 
behalf of Sony Corporation, 1-7-1 Konan Minato-
ku Tokyo, 108-0075 Japan. Inquiries related to 
product compliance based on European Union 
legislation shall be addressed to the authorized 
representative, Sony Deutschland GmbH, 
Hedelfinger Strasse 61, 70327 Stuttgart, Germany. 
For any service or guarantee matters, please refer 
to the addresses provided in the separate service 
or guarantee documents.
Hereby, Sony Corp., declares that this equipment 
is in compliance with the essential requirements 
and other relevant provisions of Directive 1999/5/
EC. 
For details, please access the following URL:
http://www.compliance.sony.de/

For customers in Europe and Australia

  Disposal of Old Electrical & 

Electronic Equipment  

(Applicable in the European 

Union and other European 

countries with separate 

collection systems)

This symbol on the product or on its packaging 

indicates that this product shall not be treated as 

household waste. Instead it shall be handed over 

to the applicable collection point for the recycling 

of electrical and electronic equipment. By 

ensuring this product is disposed of correctly, you 

will help prevent potential negative consequences 

for the environment and human health, which 

could otherwise be caused by inappropriate 

waste handling of this product. The recycling of 

materials will help to conserve natural resources. 

For more detailed information about recycling of 

this product, please contact your local Civic Office, 

your household waste disposal service or the 

shop where you purchased the product.

  

  Disposal of waste batteries 

(applicable in the European 

Union and other European 

countries with separate 

collection systems)

This symbol on the battery or on the packaging 
indicates that the battery provided with this 
product shall not be treated as household waste.
On certain batteries this symbol might be used 
in combination with a chemical symbol. The 
chemical symbols for mercury (Hg) or lead (Pb) 
are added if the battery contains more than 
0.0005% mercury or 0.004% lead.
By ensuring these batteries are disposed of 
correctly, you will help prevent potentially 
negative consequences for the environment and 
human health which could otherwise be caused 
by inappropriate waste handling of the battery. 
The recycling of the materials will help to conserve 
natural resources.
In case of products that for safety, performance 
or data integrity reasons require a permanent 
connection with an incorporated battery, this 
battery should be replaced by qualified service 
staff only. To ensure that the battery will be 
treated properly, hand over the product at end-
of-life to the applicable collection point for the 
recycling of electrical and electronic equipment.
For all other batteries, please view the section 
on how to remove the battery from the product 
safely. Hand the battery over to the applicable 
collection point for the recycling of waste 
batteries.
For more detailed information about recycling of 
this product or battery, please contact your local 
Civic Office, your household waste disposal service 
or the shop where you purchased the product.

Europe Only

Getting Started

red 

Remote

Operations

Playing a CD-DA/MP3 disc

Press CD FUNCTION 

 on the remote or press 

FUNCTION 

 on the unit repeatedly until “CD” 

appears in the display 

.

Press the 

 (open/close) button 

 to open 

the disc tray 

.

Load a disc with the label side facing up.

Label side  

(printed side)

 

(open/close) 

Press the 

 (open/close) button 

 to close 

the disc tray 

.

Press 

 (play/pause) button 

.

Playback starts.

Notes

 

ˎ

If you cannot remove the disc and “LOCKED” appears in the 

display 

, contact your nearest Sony dealer.

 

ˎ

Do not load a disc with non-standard shapes (e.g., heart, 

square, star). Doing this may cause irreparable damage to 

the system.

 

ˎ

Do not use a disc with tape, stickers or paste on it as this 

may cause malfunction.

 

ˎ

When you remove a disc, do not touch the surface of the 

disc.

Other operations

To

Do the following:

Pause playback

Press 

 

. To resume play, 

press the button again.

Stop playback

Press 

 

.

Select a track 
or file

Press 

/

 

.

Find a point in a 
track or file

Hold down 

/

 

 (or 

/

 

 on the unit) 

during playback, and release 
the button at the desired point.

Select Repeat 
Play

Press REPEAT 

 repeatedly 

until “ ” (all tracks of files) 
or “ 1” (single track or file)
appears.

Select a folder on 
an MP3 disc

Press 

 +/

 

 repeatedly.

Remove a disc

Press 

 

 on the unit.

To change the play mode

Press PLAY MODE 

 repeatedly while the player 

is stopped. You can select Normal Play mode (no 
indication or “FLDR”* appears), Shuffle Play mode 
(“SHUF” or “FLDR SHUF”* appears), or Program 
Play mode (“PGM” appears).

Play mode

*  When “FLDR” or “FLDR SHUF” appears, all the files in the 

selected folder on the MP3 disc will be played. When 

playing a CD-DA disc, the system performs the same 

operation as Normal Play (no indication) or Shuffle Play 

“SHUF.”

When “PUSH STOP” appears

You cannot change the play mode during 
playback. Stop playback then change the play 
mode.

Note on the play mode

If the power cord is disconnected when the 
system is on, the play mode returns to Normal 
Play.

Notes on Repeat Play

 

ˎ

” indicates that all tracks or files will be repeated until 

you stop playback.

 

ˎ

1” indicates that a single track or file will be repeated 

until you stop playback.

 

ˎ

If the power cord is disconnected when the system is on, 

Repeat Play is cancelled.

Notes on Shuffle Play mode

 

ˎ

When Shuffle Play mode is set to “SHUF,” the system 

shuffle-plays all tracks or files on the disc. When Shuffle 

Play mode is set to “FLDR SHUF,” the system shuffle-plays all 

tracks or files in selected folder.

 

ˎ

When you turn off the system, the selected Shuffle Play 

mode (“SHUF” or “FLDR SHUF”) is cleared and the play mode 

returns to Normal or FLDR Play mode.

Notes on playing MP3 discs

 

ˎ

Do not save unnecessary folders or files on a disc that has 

MP3 files.

 

ˎ

Folders that have no MP3 files are not recognized on the 

system.

 

ˎ

The system can only play MP3 files that have a file extension 

of “.mp3.”

 

ˎ

Even when file name has the “.mp3” file extension, if it is 

not an audio MP3 file, playing this file may generate a loud 

noise, which could cause damage of the system.

 

ˎ

The maximum number of MP3 folders and files compatible 

with this system is:

 999* folders (including the root folder)

 999  files

 250 files in a single folder

 8 folder levels (in the tree structure of files)

 

ˎ

Compatibility with all MP3 encoding/writing software, CD-R/

RW drive and recording device, and recording media cannot 

be guaranteed. Incompatible MP3 discs may produce noise 

or interrupted audio or may not play at all.

*  This include folders that have no MP3 or other files. The 

number of folders that the system can recognize may 

be less than actual number of folders, depending on the 

folder structure.

Creating your own program 

(Program Play)

Press CD FUNCTION 

 on the remote or press 

FUNCTION 

 on the unit repeatedly until “CD” 

appears in the display 

.

Press PLAY MODE 

 

repeatedly until “PGM” 

appears while the player is stopped.

Select a folder (MP3 disc only).

Press 

 +/ 

 

 repeatedly to select the 

desired folder.  
If you want to program all files in the folder, 
press   

.

Select the desired track or file number.

Press 

/

 

 repeatedly until the desired 

track or file number appears.

Total playing time 

of the selected 

track or file

Selected track  

or file number

Press   

.

“--.--” appears when the total playing time 
exceeds 100 minutes for an CD-DA or when you 
program an MP3 files.

Repeat steps 3 through 5 to program 

additional tracks or files, up to a total of 25 

tracks or files.

Press 

 

.

Your program of tracks or files starts playback.
The programmed files or tracks remain 
available until you remove the disc from the 
disc tray 

 or unplug the power cord.

To play the same program again, press 

 

.

To cancel Program Play

Press PLAY MODE 

 repeatedly until “PGM” 

disappears while the player is stopped.

To delete the last track or file of the 

program

Press CLEAR 

 while the player is stopped.

Notes

 

ˎ

If the disc is ejected after programming, all the programmed 

tracks or files are deleted.

 

ˎ

If the power cord is disconnected when the system is on, 

the programmed tracks or files are deleted.

Listening to the radio

Tuning in a radio station

Press TUNER FUNCTION 

 on the remote or 

press FUNCTION 

 on the unit repeatedly 

until “TUNER FM” or “TUNER AM” appears 

(CMT-SBT100), or “DAB” or “TUNER FM” 

appears (CMT-SBT100B) in the display.

Perform tuning.

For automatic scanning

Press TUNING MODE 

 repeatedly until “AUTO” 

appears, and then press TUNE +/

 

. Scanning 

stops automatically when a station is tuned in, 
and “STEREO” (for stereo programs only) appears 
in the display 

.

If the scanning does not stop, press 

 

 to stop 

scanning, then perform manual tuning (below).
When you tune in a station that provides RDS 
services, information such as the service name or 
station name is provided by broadcasts.

For manual tuning

Press TUNING MODE 

 repeatedly until 

“MANUAL” appears, and then press TUNE +/

 

 

repeatedly to tune in the desired station.

Notes on DAB/DAB+ stations (CMT-

SBT100B only)

 

ˎ

Before tuning in DAB/DAB+ stations, make sure that the 

DAB Initial Scan has been performed.

 

ˎ

When you tune in a station that provides RDS services, 

information such as the service name or station name is 

provided by broadcasts.

 

ˎ

When tuning in a DAB/DAB+ station, it may take a few 

seconds before you hear any sound.

 

ˎ

Primary service is automatically received when secondary 

service ends.

 

ˎ

This tuner does not support data services.

Tip

To reduce static noise on a weak FM stereo station, press FM 

MODE 

 repeatedly until “MONO” appears to turn off stereo 

reception.

To change the AM tuning interval 

(except for European and Russian 

models)

The default setting for AM tuning interval is 9 kHz 
(or 10 kHz for some areas). Use the buttons on the 
unit to perform this operation.

Press FUNCTION 

 on the unit repeatedly to 

select the AM station.

Press 

/

 

 to turn off the system.

 Power input (AC IN)

After all equipments are connected, connect the 
power cord 

 to the wall outlet.

 Speakers (left/right) connectors

Firmly connect the right speaker cord 

 to R, and 

the left speaker cord 

 to L.

 AUDIO IN (external input) jack

Connect optional external equipment with an 
audio connecting cable (not supplied).

 Antennas

 AM loop antenna (supplied) (CMT-SBT100 only) 

 FM lead antenna (supplied) (CMT-SBT100 only)

 DAB/FM lead antenna (supplied) (CMT-

SBT100B only)

Find a location and an orientation that provide 
good reception, and then fix the antennas to a 
stable surface (window, wall, etc.).
Keep the antennas away from the unit, power 
cord and other AV components to avoid picking 
noise.
Secure the end of the FM lead antenna with 
adhesive tape.

To prepare the AM loop antenna

Rewind an 

antenna cord 

wound around the 

antenna and raise 

the antenna stand.

Stand the 

antenna and 

secure it to the 

slit until it clicks.

This manual mainly explains operations using 
the remote, but the same operations can also be 
performed using the buttons on the unit having 
the same or similar names.

To use the remote

Slide and remove the battery compartment lid, 
and insert the two supplied R6 (size AA) batteries, 

 side first, matching the polarities shown below.

Notes on using the remote

 

ˎ

With normal use, the batteries should last for about 6 

months.

 

ˎ

Do not mix an old battery with a new one or mix different 

types of batteries.

 

ˎ

If you do not use the remote for a long period of time, 

remove the batteries to avoid damage from battery leakage 

and corrosion.

Location of Controls

Unit (Front)

Tip

When you use headphones, connect to 

 (headphone) jack 

.

*1

  When playing a VBR MP3/WMA file, the system may 

resume playback from a different point.

*2

  When resume play is canceled, the display returns to the 

number of folders.

To change the play mode

Press PLAY MODE 

 repeatedly while the player 

is stopped. You can select Normal Play mode (no 
indication or “FLDR” appears

*1

), or Shuffle Play 

mode (“SHUF” or “FLDR SHUF” appears

*2

).

*1

  When no indication is selected, the system plays all files on 

the USB device. When “FLDR” is selected, the system plays 

all files in the selected folder on the USB device.

*2

  When “SHUF” is selected, the system shuffle-plays all audio 

files on the USB device. When “FLDR SHUF” is selected, the 

system shuffle-plays all audio files in the selected folder.

Note on the play mode

If the power cord is disconnected when the 
system is on, the play mode returns to Normal 
Play.

Notes on Repeat Play

 

ˎ

” indicates that all files will be repeated until you stop 

playback.

 

ˎ

1” indicates that a single file will be repeated until you 

stop playback.

 

ˎ

If the power cord is disconnected when the system is on, 

Repeat Play is cancelled.

Note on Shuffle Play mode

When you turn off the system, the selected Shuffle Play 

mode (“SHUF” or “FLDR SHUF”) is cleared and the play mode 

returns to Normal Play mode (no indication or “FLDR”).

Notes

 

ˎ

The playback order for the system may differ from the 

playback order of the connected digital music player.

 

ˎ

Be sure to turn off the system before removing the USB 

device. Removing the USB device while the system is turned 

on may corrupt the data on the USB device.

 

ˎ

When USB cable connection is necessary, connect the USB 

cable supplied with the USB device to be connected. For 

details on connection, refer to the operation manual of the 

USB device.

 

ˎ

It may take time before “READING” appears after 

connecting, depending on the type of USB device 

connected.

 

ˎ

Do not connect the USB device through a USB hub.

 

ˎ

When the USB device is connected, the system reads all the 

files on the USB device. If there are many folders or files on 

the USB device, it may take a long time to finish reading the 

USB device.

 

ˎ

With some connected USB devices, it may take a long time 

to transmit signals from the system or to finish reading the 

USB device.

 

ˎ

Compatibility with all encoding/writing software cannot be 

guaranteed. If audio files on the USB device were originally 

encoded with incompatible software, those files may 

produce noise or ,may malfunction.

 

ˎ

The maximum number of folders and files on the USB 

device compatible with this system is:

 1,000* folders (including the root folder)

 3,000  files

 250 files in a single folder

 8 folder levels (in the tree structure of files)

*  This includes folders that have no playable audio file and 

empty folders. The number of folders that the system 

can recognize may be less than actual number of folders, 

depending on the folder structure.

 

ˎ

The system does not necessarily support all the functions 

provided in a connected USB device.

 

ˎ

Folders that have no audio files are not recognized.

 

ˎ

The audio formats that you can listen to with this system are 

as follows:

 MP3: file extension “.mp3”

 WMA: file extension “.wma”

 AAC: file extension “.m4a,” “mp4” or “.3gp”

Note that even when file name has the correct file 

extension, if the actual file differs, the system may produce 

noise or may malfunction.

Charging a USB device or iPod/

iPhone/iPad

If you connect a USB device or iPod/iPhone/iPad 
to the USB port 

 when the system is turned on, 

charging begins automatically.

To stop charging the USB device

Press 

/

 

 to turn off the system, and then 

disconnect the USB cable.

Notes

 

ˎ

You cannot charge the USB device or iPod/iPhone/iPad 

when the system is off. Some USB devices and iPod/iPhone 

may not be charged owing to their characteristics.

 

ˎ

If the system enters Standby mode during charging of a 

USB device or iPod/iPhone/iPad, the charging stops in 

progress. Before charging, turn off the Automatic Standby 

function. For details, see “Setting the Automatic Standby 

function.”

Using the BLUETOOTH function

You can listen to music from your iPod/iPhone/
iPad or BLUETOOTH device over a wireless 
connection.
Before using the BLUETOOTH function, perform 
pairing to register your BLUETOOTH device.

The system supports registration and connection 
of the BLUETOOTH device and NFC, which enables 
data communication by just touching a specified 
location. For details on NFC, see “Connecting by 
one-touch action (NFC).”

What is pairing?

The BLUETOOTH devices to be connected must be 

registered with each other beforehand. Pairing is 

an operation of registering two devices.

Once a pairing operation is performed, it does 

not have to be performed again. In the following 

cases, however, a pairing operation must be 

performed again:

 

ˎ

Pairing information was erased when the 

BLUETOOTH device was repaired.

Press and hold FUNCTION 

 and press 

/

 

 

on the unit.

“STEP 9K” or “STEP 10K” appears in the display 

. When you change the interval, all the AM 

preset stations are erased.

Running the DAB Automatic Scan 

manually (CMT-SBT100B only)

Before you can tune in DAB/DAB+ stations, you 
must perform a DAB Initial Scan.
When you have moved to another area, also 
perform the DAB Initial Scan manually to update 
the DAB/DAB+ service information.

Press TUNER FUNCTION 

 on the remote or 

press FUNCTION 

 on the unit repeatedly 

until “DAB” appears in the display 

.

Press OPTIONS 

 to display the setting menu.

Press 

/

 

 repeatedly to select “INITIAL,” 

then press   

.

Press 

/

 

 repeatedly to select “OK,” then 

press   

.

Scanning begins. The scanning progress is 
indicated by asterisks (*******). Depending on 
the DAB/DAB+ services available in your area, 
scanning may take a few minutes.
When scanning is complete, a list of available 
services is created.

Notes

 

ˎ

If your country or region does not support DAB/DAB+ 

broadcast,“NO SERV” appears.

 

ˎ

This procedure clears all previously stored presets.

 

ˎ

Before unplugging the DAB/FM lead antenna, make sure 

the system is turned off to preserve your own DAB/DAB+ 

settings.

Presetting radio stations

Tune in the desired station.

Press TUNER MEMORY 

.

Preset number

Press TUNE +/

 

 repeatedly to select a 

preset number.

If another station is already assigned to the 
selected preset number, the station is replaced 
by the new station.

Press   

 to register the station.

“COMPLETE” appears in the display 

.

Repeat steps 1 through 4 to register other 

stations.

You can preset up to 20 FM and 10 AM stations 
(CMT-SBT100 only), or 20 DAB/DAB+ and 20 FM 
stations (CMT-SBT100B only).

To tune in to a preset radio station

Press TUNING MODE 

 repeatedly until “PRESET” 

appears in the display 

, and then press TUNE 

+/

 

 to select the preset number to which the 

desired station is registered.

Playing a file on a USB device

You can play audio files stored on a USB device by 
connecting a USB memory or USB device to the 
system. The playable audio format is MP3/WMA*/
AAC*.
Check the websites below for the information 
about compatible USB devices.
For customers in Europe and Russia:

http://support.sony-europe.com/

For customers in Latin America:

http://www.sony-latin.com/index.crp

For customers in other countries/regions:

http://www.sony-asia.com/support

*  Files with DRM (Digital Rights Management) copyright 

protection or files downloaded from an online music store 

cannot be played on this system. If you try to play one of 

these files, the system plays the next unprotected audio 

file.

Press USB FUNCTION 

 on the remote or 

press FUNCTION 

 on the unit repeatedly 

until “USB” appears in the display 

.

Connect the USB device directly or via the USB 

cable supplied with the USB device to the USB 

port 

 on the unit.

Press 

 

 to start playback.

Other operations

To

Do the following:

Pause playback Press 

 

. To resume play, 

press the button again.

Stop playback

Press 

 

. To resume play, 

press 

 

 

*1

. To cancel 

resume play, press 

 

 

again

*2

.

Select a folder

Press 

 +/ 

 

 repeatedly.

Select a file

Press 

/

 

Find a point in 
a file

Hold down 

/

 

 

(

/

 

 on the unit) 

during playback, and release 
the button at the desired point.

Select Repeat 
Play

Press REPEAT 

 repeatedly 

until “ ” (all audio files) or  
“ 1” (single audio file) appears.

Note on DualDiscs

A DualDisc is a two sided disc product which 
mates DVD recorded material on one side with 
digital audio material on the other side. However, 
since the audio material side does not conform to 
the Compact Disc (CD) standard, playback on this 
product is not guaranteed.

Music discs encoded with copyright 

protection technologies

This product is designed to playback discs that 
conform to the Compact Disc (CD) standard. 
Recently, various music discs encoded with 
copyright protection technologies are marketed 
by some record companies. Please be aware 
that among those discs, there are some that do 
not conform to the CD standard and may not be 
playable by this product.

License and Trademark Notice

 

ˎ

Windows Media is either a registered trademark 
or trademark of Microsoft Corporation in the 
United States and/or other countries.

 

ˎ

MPEG Layer-3 audio coding technology and 
patents licensed from Fraunhofer IIS and 
Thomson.

 

ˎ

The BLUETOOTH® word mark and logos are 
registered trademarks owned by BLUETOOTH 
SIG, Inc. and any use of such marks by Sony 
Corporation is under license. Other trademarks 
and trade names are those of their respective 
owners.

 

ˎ

The N Mark is a trademark or registered 
trademark of NFC Forum, Inc. in the United States 
and in other countries.

 

ˎ

Android is a trademark of Google Inc.

 

ˎ

This product is protected by certain intellectual 
property rights of Microsoft Corporation. Use or 
distribution of such technology outside of this 
product is prohibited without a license from 
Microsoft or an authorized Microsoft subsidiary.

 

ˎ

The system names and product names indicated 
in this manual are generally the trademarks or 
registered trademarks of the manufacturer. ™ 
and ® marks are omitted in this manual.

 

ˎ

You attempt to pair the system with more than 

10 BLUETOOTH devices. 

This system can pair with up to 9 BLUETOOTH 

devices. If you pair another BLUETOOTH device 

after pairing with 9 devices was performed, 

pairing information of the device that was 

connected with the system first is overwritten 

with that of the new device.

 

ˎ

Pairing registration information of this system is 

erased from the connected device.

 

ˎ

If you initialize the system or erase the 

pairing history with the system, all the pairing 

information will be erased.

About the BLUETOOTH indicator 

The BLUETOOTH indicator in the center of the 
BLUETOOTH button 

 allows checking of the 

BLUETOOTH status.

System status

Indicator status

The system is in 
BLUETOOTH Standby 
(when the system is on).

Flashes slowly in blue.

During BLUETOOTH 
pairing

Flashes quickly in blue.

The system is 
attempting to connect 
with a BLUETOOTH 
device.

Flashes in blue.

The system has 
established in 
connection with a 
BLUETOOTH device.

Lit in blue.

When “BT STBY” is 
set to “ON” (when the 
system is off)

Flashes slowly in blue.

When “BT STBY” is set 
to “OFF” (when the 
system is off)

Goes off.

Enabling reception of AAC codec

You can receive data in AAC codec format from a 
BLUETOOTH device. To enable reception, set up 
using the option menu.

Press OPTIONS 

 to display the setting menu.

Press 

/

 

 repeatedly to select “BT AAC,” 

then press   

.

Press 

/

 

 repeatedly to select “ON” or 

“OFF,” then press   

.

ON:

 to receive in AAC codec format

OFF:

 to receive in SBC codec format

Notes

 

ˎ

If you initiate setup during BLUETOOTH connection, the 

connection is cut.

 

ˎ

When using an Apple product, update it to the latest 

software version. For details on updating, refer to the 

operation manual supplied with your Apple product.

 

ˎ

If sound is interrupted during reception in AAC codec 

format, set the BT AAC menu to “OFF.”

Pairing the system with a BLUETOOTH 

device

Connection example

BLUETOOTH device 

such as a “WALKMAN”

Place the BLUETOOTH device to be connected 

within 1 meter from the system.

Press BLUETOOTH FUNCTION 

 or press 

FUNCTION 

 on the unit repeatedly until 

“BLUETOOTH” appears in the display 

.

 

ˎ

The BLUETOOTH indicator 

 

flashes slowly 

in blue.

 

ˎ

If the system has been automatically 

connected with the BLUETOOTH device in 

the past, press BLUETOOTH 

 on the unit to 

cancel the connection so that “BLUETOOTH” 

appears in the display 

.

Press and hold BLUETOOTH 

 on the unit for 

2 seconds or longer.

The BLUETOOTH indicator 

 flashes quickly in 

blue and “PAIRING” flashes in the display

 

.

The system is in Pairing mode.

Perform the pairing operation on the 

BLUETOOTH device and search for this system 

with the BLUETOOTH device.

When searching has finished, a list of the 
devices found may appear on the BLUETOOTH 
device display.

 

ˎ

This system appears as “SONY:CMT-SBT100” 

or “SONY:CMT-SBT100B.” If it does not appear, 

perform the procedure from step 1 again.

 

ˎ

When establishing connection with this 

system, select the audio profile (A2DP, AVRCP) 

on the BLUETOOTH device.

 

ˎ

If the BLUETOOTH device does not support 

AVRCP (Audio Video Remote Control Profile), 

you cannot perform playback or stop 

playback with the system.

 

ˎ

For details on operations of the BLUETOOTH 

device to be connected, refer to the operation 

manual supplied with your BLUETOOTH 

device.

Setting the clock

Press 



 

 to turn on the system.

Press TIMER MENU 

 to select the clock set 

mode.

If “PLAY SET” flashes, press 

/

 

 repeatedly 

to select “CLOCK,” and then press   (enter) 

.

Press 

/

 

 repeatedly to set the hour, then 

press   (enter) 

.

Use the same procedure to set the minutes.

Note

The clock settings are reset when you disconnect the power 

cord or if a power failure occurs.

To display the clock when the system is off

Press DISPLAY 

 

repeatedly to display the clock.

The clock is displayed for about 8 seconds.
If the system is in BLUETOOTH Standby mode, the 
clock does not appear by pressing DISPLAY 

.

Reception of DAB/DAB+ radio station 

(CMT-SBT100B only)

When you turn on the system for the first time 
after you purchase the system, DAB Automatic 
Scan starts automatically and creates a list of 
available services. During the DAB Automatic 
Scan, “



” appears. Do not press any 

button on the unit or the remote during DAB 
Automatic Scan. Scanning is interrupted and 
service list may not be created properly. To run 
the DAB Automatic Scan manually, perform the 
procedure of “Running the DAB Automatic Scan 
manually (CMT-SBT100B only).” If you have moved 
to another area, perform the DAB Automatic 
Scan manually and re-register the contents of 
broadcasts.

Attaching speaker pads

Attach the supplied speaker pads to the bottom 
of the speakers to prevent slipping.

Rear of the speaker

4-464-274-

13

 (2)

Home Audio System

GB

 Operating Instructions

©2013   Sony Corporation     Printed in China

CMT-SBT100/SBT100B

Отзывы: