![background image](http://html.mh-extra.com/html/sony/cmt-sbt100/cmt-sbt100_operating-instructions_420436002.webp)
CMT-SBT100/SBT100B (GB) 4-464-274-
13
(2)
5
Select “SONY:CMT-SBT100” or “SONY:CMT-
SBT100B” in the display of the BLUETOOTH
device.
If prompted to enter a passkey on the
BLUETOOTH device, enter “0000.”
6
Operate the BLUETOOTH device and perform
BLUETOOTH connection.
When pairing is completed and connection
with the BLUETOOTH device is established
correctly, the display
changes to
“BLUETOOTH” from “PAIRING” and the
BLUETOOTH indicator
flashes slowly in blue.
ˎ
Depending on the type of BLUETOOTH device,
connection may start automatically after
pairing is completed.
Notes
ˎ
“Passkey” may be called “Passcode,” “PIN code,” “PIN
number” or “Password,” etc., depending on the device.
ˎ
The pairing standby status of the system is cancelled after
about 5 minutes. If pairing is not successful, perform the
procedure from step 1.
ˎ
If you want to pair with several BLUETOOTH devices,
perform the procedure from step 1 to 6 individually for each
BLUETOOTH device.
Tip
You can perform a pairing operation or attempt to make a
BLUETOOTH connection with another BLUETOOTH device
while the BLUETOOTH connection is established with one
BLUETOOTH device. The currently established BLUETOOTH
connection is cancelled when BLUETOOTH connection with
another device is successfully established.
To erase the pairing registration
information
1
Press BLUETOOTH FUNCTION
on the remote
or press FUNCTION
on the unit repeatedly
until “BLUETOOTH” appears in the display
.
When the system is connected with a
BLUETOOTH device, the device name set for the
connected BLUETOOTH device appears in the
display
of the system. Press BLUETOOTH
on the unit to cancel the connection with that
BLUETOOTH device then display “BLUETOOTH.”
2
Press OPTIONS
to display the setting menu.
3
Press
/
repeatedly to select “DEL LINK,”
then press
.
4
Press
/
repeatedly to select “OK,” then
press
.
“COMPLETE” appears and all the pairing
information is erased.
Note
If you have erased the pairing information, you cannot make
a BLUETOOTH connection unless pairing is performed again.
To connect with a BLUETOOTH device again, you must enter
the passkey on the BLUETOOTH device.
Connecting by one-touch action (NFC)
NFC enables data communication by just touching
your device to a specified location.
Compatible smartphones are those equipped with
the NFC function (compatible operating system:
Android version 2.3.3 or later with the exception of
Android 3.x).
Check the website below for information on
compatible devices.
For customers in Europe and Russia:
http://support.sony-europe.com/
For customers in Latin America:
http://www.sony-latin.com/index.crp
For customers in other countries/regions:
http://www.sony-asia.com/support
Preparation on your smartphone (Android)
An NFC-compliant application must be installed
on your smartphone. If not installed, you can
download “NFC Easy Connect” from Google Play.
ˎ
In some countries and regions, NFC-compliant
application may not be downloaded.
ˎ
For some smartphones, this function may
be available without downloading “NFC Easy
Connect.” In this case, the operation and
specifications of the smartphone may be
different from the description in this manual.
1
Install the application.
If you access using 2D Code
Read the following 2D Code to access.
2
Set your smartphone to enable the NFC
function.
For details, refer to the user’s guide supplied
with your smartphone.
About the “NFC Easy Connect” application
This is a free application especially used for
Android. Search the internet for detailed
information on “NFC Easy Connect” and download
the application.
ˎ
In some countries and regions, NFC-compliant
application may not be downloaded.
Making a connection with your
smartphone by one-touch action
Just touch your smartphone to the system. The
system is turned on automatically, and pairing and
BLUETOOTH connection are established.
1
Start the “NFC Easy Connect” application on
your smartphone.
Check that the application display appears.
2
Touch your smartphone to the unit.
Touch the smartphone to the N-Mark
on the
unit and maintain contact until the smartphone
vibrates.
Complete the connection with your
smartphone, following the instructions on the
screen.
Refer to the user’s guide of your smartphone
for the part of your smartphone used as touch
contact.
ˎ
To disconnect the established connection, touch
your smartphone to the N-Mark
on the unit.
ˎ
When you touch an NFC-compliant smartphone
to the unit while another BLUETOOTH device
is connected with this system, the BLUETOOTH
device is disconnected and the system is
connected with the smartphone.
ˎ
If you touch the smartphone connected
with this system to another NFC-compliant
BLUETOOTH headset or speaker, the smartphone
is disconnected from the system and connected
with the touched BLUETOOTH device.
Listening to music through a
BLUETOOTH connection
You can operate a BLUETOOTH device by
connecting the system and a BLUETOOTH device
using AVRCP.
Check the following before playing music:
ˎ
The BLUETOOTH function of the BLUETOOTH
device is enabled.
ˎ
Pairing has been completed.
1
Press BLUETOOTH FUNCTION
on the remote
or press FUNCTION
on the unit repeatedly
until “BLUETOOTH” appears in the display
.
2
Establish BLUETOOTH connection with the
BLUETOOTH device.
Once the connection is established, “CONNECT”
appears in the display
then the BLUETOOTH
device name set with the BLUETOOTH device
appears.
If the BLUETOOTH device has been connected
with this system in the past, it may be
connected automatically with no user operation
required.
3
Press
to start playback.
Depending on the BLUETOOTH device, you may
have to press
twice.
Depending on the BLUETOOTH device, you
may have to start up the AV software of the
BLUETOOTH device beforehand.
4
Press /
on the remote or turn
the VOLUME dial
on the unit left or right to
adjust the volume.
Other operations
To
Do the following:
Pause playback
Press
*.
Stop playback
Press
.
Select a folder
Press
+/
.
Select a file
Press
/
.
Find a point in
a file
Hold down
/
(or
/
on the unit)
during playback and release
the button at the desired point.
* Depending on the BLUETOOTH device, you may have to
press
twice.
Note
These operations may not be available for certain
BLUETOOTH devices. In addition, the actual operations may
differ depending on the connected BLUETOOTH device.
To check the address of a connected
BLUETOOTH device
Press DISPLAY
while the BLUETOOTH device
name set on the connected BLUETOOTH device is
shown in the display
. The BLUETOOTH device
address appears in two installments on the
system display for 8 seconds.
To cancel the connection with a
BLUETOOTH device
Press BLUETOOTH
on the unit. “DISCONNECT”
appears in the display
.
Depending on the BLUETOOTH device, the
connection may be cancelled automatically when
you stop playback.
Using optional audio
components
1
Press VOLUME
on the remote or turn the
VOLUME dial
on the unit left to turn down
the volume.
2
Connect additional audio component to the
AUDIO IN jack
using an audio connecting
cable (not supplied).
3
Press AUDIO IN FUNCTION
on the remote
or press FUNCTION
on the unit repeatedly
until “AUDIO IN” appears in the display
.
4
Start playback of the connected component.
Adjust the volume on the connected
component during playback.
5
Press /
on the remote or turn
the VOLUME dial
on the unit left or right to
adjust the volume.
Note
The system may enter Standby mode automatically if the
volume level of the connected component is too low. Adjust
the component’s volume accordingly.
Setting the Automatic Standby
function
With the Automatic Standby function, the
system enters Standby mode automatically in
about 15 minutes when there is no operation or
audio signal output. “AUTO STBY” appears in the
display
for 2 minutes before the system enters
Standby mode. By default, the Automatic Standby
function is turned on. You can turn off the function
using the option menu.
1
Press OPTIONS
to display the setting menu.
2
Press
/
repeatedly to select “AUTO STBY,”
then press
.
3
Press
/
repeatedly to select “ON” or
“OFF,” then press
.
Notes
ˎ
The Automatic Standby function is invalid for the tuner
function (FM/AM/DAB
*
), even when you have enabled it.
ˎ
The system may not enter Standby mode automatically in
the following cases:
while an audio signal is being detected
during playback of audio tracks or files
while the preset Sleep Timer or Play Timer is in process
ˎ
The system counts down the time (15 minutes) again until
it enters Standby mode, even when Automatic Standby
function is enabled when a USB device is connected or
when a button on the remote or unit is pressed.
* AM is available for CMT-SBT100 only, or DAB is for CMT-
SBT100B only.
Setting the BLUETOOTH Standby
mode
You can enable/disable BLUETOOTH Standby
mode.
When BLUETOOTH Standby mode is enabled,
the system enters Wait mode for BLUETOOTH
connection even when the system is turned off.
If the system receives a playback command from
the connected BLUETOOTH device, it turns on and
music is played back. The BLUETOOTH Standby
mode is disabled by default.
1
Press OPTIONS
to display the setting menu.
2
Press
/
repeatedly to select “BT STBY,”
then press
.
3
Press
/
repeatedly to select “ON” or
“OFF,” then press
.
4
Press
/
(power)
to turn off the system.
When “BT STBY” is set to “ON,” the system turns
on and you can listen to music by activating
BLUETOOTH on the connected component.
Note
“BT STBY” does not appear in the setting menu, if the
BLUETOOTH device is not registered on this system.
Setting the wireless signal ON/
OFF
When the unit is turned on, you can control a
BLUETOOTH signal.
The default setting is ON.
1
Turn on the unit.
2
If flashes in the display window, press and
hold BASS BOOST
and BLUETOOTH
of
the unit.
3
After “RF OFF” (wireless signal is off) or “RF
ON” (wireless signal is on) appears, release the
button.
Tips
ˎ
When this setting is set to OFF, the BLUETOOTH function is
not available.
ˎ
When this setting is OFF, the unit can be turned on using
the one-touch action (NFC) from a smartphone/tablet.
ˎ
When this setting is OFF, the BLUETOOTH Standby mode
cannot be set.
ˎ
When the BLUETOOTH Standby mode is ON, the
BLUETOOTH Standby mode turns OFF when this setting is
turned OFF.
ˎ
When this setting is OFF, the unit and BLUETOOTH device
cannot be paired.
ˎ
The setting is saved even if you turn off the system.
Adjusting the sound
Setting the bass boost
Press BASS BOOST
repeatedly to select “ON”
or “OFF.”
Adjusting the bass and treble
Press BASS +/
to adjust bass or /
to adjust treble.
Or, press EQ
on the unit repeatedly to select
“BASS” or “TREBLE,” and adjust the selected item
using TUNE +/
.
Tip
This system is equipped with the DSEE function to reproduce
clear treble despite degradation caused by compression.
The DSEE function is usually activated automatically by
recognizing the sound source, but it may not be activated
depending on the function in use.
CD-DA/MP3 disc
“LOCKED” appears in the display
and
the disc cannot be removed from the disc
tray.
ˎ
Consult your nearest Sony dealer or local
authorized Sony service facility.
The disc or file will not play.
ˎ
The disc that has not been finalized (a CD-R or
CD-RW disc to which data can be added).
The sound skips, or the disc will not play.
ˎ
Wipe the disc clean, and replace it.
ˎ
Move the system to a location away from
vibration (for example, on top of a stable stand).
ˎ
Oscillation of the speakers may be the cause of
sound skips, depending on the volume level.
Move the speakers away from the unit or change
the location of the speakers.
Play does not start from the first track or
file.
ˎ
Return to normal play by pressing PLAY MODE
repeatedly in stop mode until both “PGM”
and “SHUF” in the display
disappear.
Starting playback takes more time than
usual.
ˎ
The following discs can increase the time it takes
to start playback:
a disc recorded with a complicated tree
structure.
a disc recorded in multi-session format.
a disc that has many folders.
USB device
An unsupported USB device is connected.
ˎ
If you connect an unsupported USB device,
the following problems may occur. Check the
information on the websites about compatible
USB devices with URLs listed under “Playing a
file on a USB device.”
The USB device is not recognized.
File or folder names are not displayed on this
system.
Playback is not possible.
The sound skips.
There is noise.
A distorted sound is output.
There is no sound.
ˎ
The USB device is not connected correctly. Turn
off the system, and then reconnect the USB
device.
There is noise, skipping, or distorted
sound.
ˎ
An unsupported USB device is connected.
Connect a supported USB device.
ˎ
Turn off the system, then reconnect the USB
device and turn on the system.
ˎ
The music data itself contains noise, or the
sound is distorted. Noise may have been
entered when creating music data due to the
conditions of the computer. In this case, delete
the file and send the music data again.
ˎ
The bit rate used when encoding the files was
low. Send files encoded with higher bit rates to
the USB device.
“READING” is displayed for an extended
time, or it takes a long time before
playback starts.
ˎ
The reading process may take a long time in the
following cases.
There are many folders or files on the USB
device.
The file structure is extremely complex.
Not enough free space in the memory.
The internal memory is fragmented.
The file or folder name (album name) is
not displayed correctly.
ˎ
Send the music data to the USB device again,
as the data stored in the USB device may have
been corrupted.
ˎ
The character code that can be displayed by this
system are as follows:
Upper cases (A to Z).
Numbers (0 to 9).
Symbols (< > * +, [ ] @ \ _).
Other characters appear as “_.”
The USB device is not recognized.
ˎ
Turn off the system and reconnect the USB
device, then turn on the system.
ˎ
Check the information on the websites about
compatible USB devices with URLs listed under
“Playing a file on a USB device.”
ˎ
The USB device does not work properly. Refer
to the operating manual supplied with the USB
device for how to deal with this problem.
Play does not start.
ˎ
Turn off the system and reconnect the USB
device, then turn on the system.
ˎ
Check the information on the websites about
compatible USB devices with URLs listed under
“Playing a file on a USB device.”
Play does not start from the first track.
ˎ
Set the play mode to Normal Play mode.
Changing the display
To
Do the following:
View
information on
the display
*1
Press DISPLAY
repeatedly
when the system is on.
Display clock
Press DISPLAY
repeatedly
when the system is off.
*2
The
clock appears for about 8
seconds.
*1
You can view the information described below during
playback of a CD-DA/MP3 disc.
*2
The information does not appear in BLUETOOTH mode.
CD-DA disc
remaining playing time of a track during
playback
total remaining playing time
MP3 disc
track or file name
artist name
album name
Notes on the display information
ˎ
Characters that cannot be displayed appear as “_”.
ˎ
The following are not displayed:
remaining playing time or total playing time for an MP3
disc
remaining playing time for an MP3 file
ˎ
The following are not displayed correctly:
elapsed playing time of an MP3 file encoded using VBR
(Variable Bit Rate).
folder and file names that do not follow either the
ISO9660 Level 1/Level 2 or Joliet in the expansion format.
ˎ
The following are displayed:
total playing time for a CD-DA disc (except when PGM
mode is selected and the player is stopped)
remaining playing time for a track of CD-DA disc
remaining playing time for a CD-DA disc (only when
Normal Play mode is selected during playback)
ID3 tag information for MP3 files. ID3 version 2 tag
information display has priority when both ID3 version 1
and version 2 tags are used for a single MP3 file.
up to 64 characters for an ID3 tag, where characters
allowed are uppercase letters (A to Z), numbers (0 to 9),
and symbols (˝ $ % ’ ( ) * + , – . / < = > @ [ \ ] _ ` { | } ! ? ^ ~)
Notes on the DAB/DAB+ display
information (CMT-SBT100B only)
The following is also displayed;
up to 8 characters of service name, up to 128 characters of
DLS (Dynamic Label Segment) and up to 16 characters of
ensemble label.
a value between 0 and 100 indicating the signal quality is
displayed.
Using the timers
The system offers Sleep Timer and Play Timer. The
Sleep Timer has priority over the Play Timer.
Setting the Sleep Timer
The system is turned off automatically after the
time set for the Sleep Timer is elapsed.
The Sleep Timer works even if the clock is not set.
1
Press SLEEP
repeatedly to specify the time.
ˎ
Select “30MIN” to turn off the system after 30
minutes.
ˎ
To cancel the Sleep Timer, select “OFF.”
Setting the Play Timer
You can listen to a CD-DA or MP3 disc or radio
every day at a preset time.
Make sure you have set the clock before setting
the timer.
1
Prepare the sound source, and turn the
VOLUME dial
on the unit left or right or
press /
on the remote to adjust
the volume.
The available sound sources are: CD, USB, and
TUNER (FM, AM or DAB)* FUNCTION.
To start from a specific CD track, audio file or
radio station, create your own program.
* FM or AM for CMT-SBT100, or FM or DAB for CMT-
SBT100B.
2
Press TIMER MENU
.
3
Press
/
repeatedly to select “PLAY SET,”
then press
.
The start time flashes in the display.
4
Set the time to start operation.
Press
/
repeatedly to set the hour, then
press
.
The minute indication flashes. Use the
procedure above to set the minutes.
When the start time is set, the system goes to
the stop time setting.
5
Use the same procedure as in step 4 to set the
time to stop the operation.
If “TIME NG” flashes in the display
The start time and the stop time are set to the
same time. Change the stop time.
6
Select the sound source.
Press
/
repeatedly until the desired sound
source appears, then press
.
For the available sound sources, see step 1.
After the sound source selection is finished, the
confirmation display for the Play Timer appears.
7
Press
/
(power)
to turn off the system.
ˎ
When the Play Timer is set, the system
automatically turns on about 15 seconds (for
FM, AM or DAB
*
) or about 90 seconds (for a
CD-DA disc or USB device) before the preset
time.
ˎ
The Play Timer does not work if the system
is on at the preset time. Be careful not to
operate the system until it is turned on and
starts play with the timer.
* AM is available for CMT-SBT100 only, or DAB is for CMT-
SBT100B only.
To check the setting
1
Press TIMER MENU
.
2
Press
/
repeatedly to select “TIMER SEL,”
and then press
.
3
Press
/
repeatedly to select “PLAY SEL,”
and then press
.
The timer setting appears in the display.
To cancel the timer
Repeat the same procedure as “To check the
setting” until “OFF” appears in step 3, and then
press
.
To change the setting
Start over from step 1.
Notes
ˎ
When the sound source for a Play Timer is set to a radio
station that you set using Automatic Scanning (AUTO)
or Manual Tuning (MANUAL) and you change the radio
frequency or band after setting the timer, the radio station
setting for the timer will also be changed.
ˎ
When the sound source for a Play Timer is set to a radio
station tuned from a preset radio station (preset number 1
to 20), and if you change the frequency of the radio station
or band after setting the timer, the radio station setting for
the timer will not change. The radio station tuning for the
timer is fixed at what you set for it.
Tip
The Play Timer setting remains as long as the setting is not
cancelled manually.
Troubleshooting
1
Make sure the power cord is firmly connected.
2
Find your problem in the checklist below, and
take the indicated corrective action.
If the issue persists, contact your nearest Sony
dealer.
If the STANDBY indicator
flashes
Immediately unplug the power cord, and check
the following item.
ˎ
Is the speaker cord shorted out?
After the STANDBY indicator
stops flashing,
reconnect the power cord, and turn on the
system. If the issue persists, contact your
nearest Sony dealer.
General
The system does not turn on.
ˎ
Is the power cord plugged in correctly?
The system has entered Standby mode
unexpectedly.
ˎ
This is not a malfunction. The system enters
Standby mode automatically in about 15 minutes
when there is no operation or audio signal
output. See “Setting the Automatic Standby
function.”
The clock setting or the Play Timer
operation has been cancelled
unexpectedly.
ˎ
If about a minute elapses with no operation, the
clock setting or Play Timer setting is cancelled
automatically. Perform the operation again from
the beginning.
There is no sound.
ˎ
Make sure the speaker cords are connected
correctly.
ˎ
Check the supplied speakers are used.
ˎ
Turn the VOLUME dial
on the unit clockwise
or press
on the remote to turn up
the volume.
ˎ
Make sure the headphones are disconnected
from the headphone jack.
ˎ
Make sure an external component is connected
correctly to the AUDIO IN jack
and set the
function to AUDIO IN.
ˎ
The specified station may have temporarily
stopped broadcast.
ˎ
The balance of left and right sound is false.
Check the left and right speakers are connected
correctly.
ˎ
Put the speakers symmetrically.
ˎ
Connect the supplied speakers.
Severe hum or noise occurs.
ˎ
Move the system away from sources of noise.
ˎ
Connect the system to a different wall outlet.
ˎ
Use of an AC power tap with a noise filter (not
supplied) is recommended.
The remote does not function.
ˎ
Remove any obstacles between the remote and
the remote sensor
on the unit, and position
the unit away from fluorescent lights.
ˎ
Point the remote at the remote sensor on the
unit.
ˎ
Move the remote closer to the system.
The USB device cannot be charged.
ˎ
Make sure the USB device is connected securely.
ˎ
Charging cannot be made when the power of
the system is off.
ˎ
The USB device may not be supported by this
system. Check the information on the websites
about compatible USB devices.
Tuner
Severe hum or noise occurs (“STEREO”
flashes in the display window
), or
broadcasts cannot be received.
ˎ
Connect the antenna properly.
ˎ
Find a location and an orientation that provide
good reception, and then set up the antenna
again.
ˎ
Keep the antennas away from the unit, speaker
cord or other AV components to avoid picking
up noise.
ˎ
Turn off nearby electrical equipment.
Several radio stations can be heard at the
same time.
ˎ
Find a location and an orientation that provide
good reception, and then set up the antenna
again.
ˎ
Bundle the antenna cables using commercially
available cord clips, for example, and adjust the
cable lengths.
DAB/DAB+ radio station is not received
properly.
ˎ
Check all antenna connections, then perform the
DAB Automatic Scan procedure (see “Running
the DAB Automatic Scan manually (CMT-
SBT100B only)”).
ˎ
The current DAB/DAB+ service may not be
available. Press TUNE +/
to select a different
service.
ˎ
If you have moved to another area, some
services/frequencies may have changed
and you may not be able to tune into your
usual broadcast. Perform the DAB Automatic
Scan procedure to re-register the contents of
broadcasts. (Performing this procedure clears all
previously stored presets.)
The DAB/DAB+ broadcast of has been
interrupted.
ˎ
Check the location of the system or adjust
the orientation of the antenna to increase the
indicated value of the signal quality. Refer to
“Changing the display” for further details on the
signal quality.
To reset the system to factory settings
If the system still does not operate properly, reset
the system to factory settings.
Use buttons on the unit to reset the system to its
factory default settings.
1
Disconnect the power cord and confirm that
the STANDBY indicator
is not lit. Then
reconnect the power cord and turn on the
system.
2
Press and hold
and
/
on the unit
until “RESET” appears in the display.
All user-configured settings, such as preset
radio stations, timer, and the clock, are deleted.
If the problem persists after doing all of the
above, consult your nearest Sony dealer.
Messages
CANNOT PLAY:
The system cannot play audio
files due to an unsupported file format or
playback restriction.
CAN’T PLAY:
You have set a disc that cannot be
played back on this system, such as CD-ROM
and DVD disc.
COMPLETE:
The station preset operation ended
normally.
DATA ERROR:
You tried to play an unplayable file.
ERROR:
You operated the system during
initialization. Wait for a while until the
initialization is completed.
LOCKED:
The disc tray
is locked and you
cannot remove the disc. Contact your nearest
Sony dealer.
NO DEVICE:
No USB device is connected or the
connected USB device has been removed.
NO DISC:
There is no disc in the player, or you
have loaded a disc that cannot be played.
NO MEMORY:
The memory media is not inserted
in the USB device, or the system does not
identify the memory media.
NO STEP:
All of the programmed tracks have
been erased.
NO SUPPORT:
The system does not support the
connected USB device.
NO TRACK:
There are not playable files on the
USB device or disc.
NOT IN USE:
You pressed an unplayable button.
OVER CURRENT:
Remove the USB device from
the port and turn off the system then turn on the
system.
PUSH STOP:
You pressed PLAY MODE
during
playback in the CD or USB function.
READING:
The system is reading the information
on the disc or USB device. Some buttons do not
work during reading.
STEP FULL:
You tried to program more than 25
tracks or files.
TIME NG:
The Play Timer start and end times are
set to the same time.
Precautions
Discs that this system CAN play
ˎ
Audio CD-DA discs
ˎ
CD-R/CD-RW (audio data of CD-DA tracks and
MP3 files)
Do not use a CD-R/CD-RW disc with no data
stored. Doing so may damage the disc.
Discs that this system CANNOT play
ˎ
CD-ROM
ˎ
CD-R/CD-RW other than those recorded in
music CD format or MP3 format conforming to
ISO9660 Level 1/Level 2, Joliet
ˎ
CD-R/CD-RW recorded in multi-session format
and not closed the session
ˎ
CD-R/CD-RW of poor recording quality,
CD-R/CD-RW that have scratches or are dirty,
or CD-R/CD-RW recorded with an incompatible
recording device
ˎ
CD-R/CD-RW which is finalized incorrectly
ˎ
Discs containing files other than MPEG 1 Audio
Layer-3 (MP3) files
ˎ
Discs of non-standard shape (for example, heart,
square, star)
ˎ
Discs that have adhesive tape, paper, or sticker
attached to them
ˎ
Rental or used discs with attached seals where
the glue extends beyond the seal
ˎ
Discs that have labels printed using ink that feels
tacky when touched
Notes on CD-DA discs
ˎ
Before playing, wipe the disc with a cleaning
cloth from the center out to the edge.
ˎ
Do not clean discs with solvents, such as
benzine, thinner, or commercially available
cleaners or anti-static spray intended for vinyl
LPs.
ˎ
Do not expose discs to direct sunlight or heat
sources such as hot air ducts, nor leave it in a car
parked in direct sunlight.
On safety
ˎ
Completely disconnect the power cord (mains
lead) from the wall outlet (mains) if it is not
going to be used for an extended period of time.
When unplugging the system, always grip the
plug. Never pull the cord itself.
ˎ
Should any solid object or liquid get into the
system, unplug the system, and have it checked
by qualified personnel before operating it again.
ˎ
The AC power cord can be changed only by a
qualified service facility.
On placement
ˎ
Do not place the system in an inclined position
or in locations that are extremely hot, cold, dusty,
dirty, or humid or lacking adequate ventilation,
or subject to vibration, direct sunlight or a bright
light.
ˎ
Be careful when placing the system on surfaces
that have been specially treated (for example,
with wax, oil, polish) as staining or discoloration
of the surface may result.
ˎ
If the system is brought directly from a cold to a
warm location or is placed in a very damp room,
moisture may condense on the lens inside the
CD player, and cause the system to malfunction.
In this situation, remove the disc, and leave the
system turned on for about an hour until the
moisture evaporates.
On heat buildup
ˎ
Heat buildup on the unit during operation is
normal and is not cause for alarm.
ˎ
Do not touch the cabinet if it has been used
continuously at a high volume because the
cabinet may have become hot.
ˎ
Do not obstruct the ventilation holes.
On the speaker system
This speaker system is not magnetically shielded,
and the picture on nearby TV sets may become
magnetically distorted. In this situation, turn off
the TV, wait 15 to 30 minutes, and turn it back on.
Cleaning the cabinet
Clean this system with a soft cloth slightly
moistened with a mild detergent solution. Do not
use any type of abrasive pads, scouring powder,
or solvents, such as thinner, benzine, or alcohol.
BLUETOOTH wireless
technology
BLUETOOTH wireless technology is a short-range
wireless technology linking digital devices, such
as personal computers and digital still cameras.
Using the BLUETOOTH wireless technology, you
can operate the units involved within a range of
about 10 meters.
The BLUETOOTH wireless technology is commonly
used between two devices, but a single device
can be connected to multiple devices.
You do not need wires to get connected as you
do with a USB connection, and you do not need
to place the devices face to face as you do with
wireless infrared technology. You can use the
technology with one BLUETOOTH device in your
bag or pocket.
BLUETOOTH wireless technology is a global
standard supported by thousands of companies.
These companies produce products that meet the
global standard.
Supported BLUETOOTH version and
profiles
Profile refers to a standard set of capabilities for
various BLUETOOTH product capabilities. See
“Specifications” for details on the supported
BLUETOOTH version and profiles.
Notes
ˎ
To use a BLUETOOTH device connected to this system,
the device must support the same profile as this system.
Note that the functions of the BLUETOOTH device may be
different depending on the specifications of the device,
even if it has the same profile as this system.
ˎ
Because of the properties of BLUETOOTH wireless
technology, playback on this system is slightly delayed
compared with audio playback on the transmitting device.
Effective communication range
BLUETOOTH devices should be used within
approximately 10 meters (unobstructed distance)
of each other. The effective communication
range may become shorter under the following
conditions.
When a person, metal object, wall or other
obstruction is between the devices with a
BLUETOOTH connection
Locations where a wireless LAN is installed
Around microwave ovens that are in use
Locations where other electromagnetic waves
occur
Effects of other devices
BLUETOOTH devices and wireless LAN (IEEE
802.11b/g) use the same frequency band (2.4
GHz). When using your BLUETOOTH device
near a device with wireless LAN capability,
electromagnetic interference may occur. This
could result in lower data transfer rates, noise,
or inability to connect. If this happens, try the
following remedies:
Try connecting this system and BLUETOOTH
mobile phone or BLUETOOTH device when you
are at least 10 meters away from the wireless
LAN equipment.
Turn off the power to the wireless LAN
equipment when using your BLUETOOTH
device within 10 meters.
Effects on other devices
The radio waves broadcast by this system may
interfere with the operation of some medical
devices. Since this interference may result in
malfunction, always turn off the power on
this system, BLUETOOTH mobile phone and
BLUETOOTH device in the following locations:
In hospitals, on trains,and in airplanes
Near automatic doors or fire alarms
Notes
ˎ
This system supports security functions that comply with
the BLUETOOTH specification as a means of ensuring
security during communication using BLUETOOTH
technology. However, this security may be insufficient
depending on the setting contents and other factors, so
always be careful when performing communication using
BLUETOOTH technology.
ˎ
Sony cannot be held liable in any way for damages or other
loss resulting from information leaks during communication
using BLUETOOTH technology.
ˎ
BLUETOOTH communication is not necessarily guaranteed
with all BLUETOOTH devices that have the same profile as
this system.
ˎ
BLUETOOTH devices connected with this system must
comply with the BLUETOOTH specification prescribed
by the BLUETOOTH SIG, Inc., and must be certified to
comply. However, even when a device complies with the
BLUETOOTH specification, there may be cases where the
characteristics or specifications of the BLUETOOTH device
make it impossible to connect, or may result in different
control methods, display or operation.
ˎ
Noise may occur or the audio may cut off depending on
the BLUETOOTH device connected with this system, the
communications environment, or surrounding conditions.
Specifications
Amplifier section
Power output (rated): 20 watts + 20 watts (at
6 ohms, 1 kHz, 1% THD)
RMS power output (reference): 25 watts + 25 watts
(per channel at 6 ohms, 1 kHz)
Inputs/Outputs
AUDIO IN (external input) jack:
Stereo mini jack, sensitivity 700 mV, impedance
47 kilohms
(headphone) jack:
Stereo mini jack, 8 ohms or more
USB:
Supported bit rate: MP3 (MPEG 1 Audio Layer-3):
32 kbps – 320 kbps, VBR
WMA: 48 kbps - 192 kbps, VBR
AAC: 48 kbps - 320 kbps
Sampling frequencies: MP3 (MPEG 1 Audio
Layer-3): 32/44.1/48 kHz
WMA: 44.1 kHz
AAC: 44.1 kHz
USB port: Type A, 5 V DC 2.1 A
CD-DA/MP3 player section
System: Compact disc and digital audio system
Laser Diode Properties
Emission Duration: Continuous
Laser Output*: Less than 44.6 µW
* This output is the value measurement at a
distance of 200mm from the objective lens
surface on the Optical Pick-up Block with 7mm
aperture.
Frequency response: 50 Hz – 20 kHz
Signal-to-noise ratio: More than 90 dB
Dynamic range: More than 90 dB
Tuner section
AM tuner section (CMT-SBT100 only):
Tuning range:
European models:
531 kHz – 1,602 kHz (with 9 kHz tuning
interval)
Other models:
530 kHz – 1,710 kHz (with 10 kHz tuning
interval)
531 kHz – 1,710 kHz (with 9 kHz tuning
interval)
Antenna: AM loop antenna
Intermediate frequency: 400 kHz
FM tuner section:
FM stereo, FM superheterodyne tuner
Antenna: FM lead antenna
Tuning range: 87.5 MHz – 108.0 MHz (50 kHz
step)
DAB/DAB+ tuner section (CMT-SBT100B only):
FM stereo, DAB/FM superheterodyne tuner
Frequency range*
Band-III: 174.928 (5A) MHz – 239.200 (13F) MHz
* For details, see “DAB/DAB+ frequency table”
below.
Antenna: DAB/FM lead antenna
The DAB/DAB+ services are available only in
countries/regions that support DAB/DAB+
services.
DAB/DAB+ frequency table (Band-III)
Frequency
Label
Frequency
Label
174.928 MHz
5A
209.936 MHz
10A
176.640 MHz
5B
211.648 MHz
10B
178.352 MHz
5C
213.360 MHz
10C
180.064 MHz
5D
215.072 MHz
10D
181.936 MHz
6A
216.928 MHz
11A
183.648 MHz
6B
218.640 MHz
11B
185.360 MHz
6C
220.352 MHz
11C
187.072 MHz
6D
222.064 MHz
11D
188.928 MHz
7A
223.936 MHz
12A
190.640 MHz
7B
225.648 MHz
12B
192.352 MHz
7C
227.360 MHz
12C
194.064 MHz
7D
229.072 MHz
12D
195.936 MHz
8A
230.784 MHz
13A
197.648 MHz
8B
232.496 MHz
13B
199.360 MHz
8C
234.208 MHz 13C
201.072 MHz
8D
235.776 MHz
13D
202.928 MHz
9A
237.488 MHz
13E
204.640 MHz 9B
239.200 MHz
13F
206.352 MHz
9C
208.064 MHz 9D
* Frequencies are displayed to two decimal places
on this system.
BLUETOOTH section
Communication system:
BLUETOOTH Standard version 3.0
Output:
BLUETOOTH Standard Power Class 2
Maximum communication range:
Line of sight approx. 10 m
*1
Frequency band:
2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Modulation method:
FHSS
Compatible BLUETOOTH profiles
*2
:
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control Profile)
Supported content protection method:
SCMS-T method
Transmission bandwidth:
20 Hz – 20,000 Hz (with 44.1 kHz sampling)
*1
The actual range will vary depending on
factors such as obstacles between devices,
magnetic fields around a microwave oven,
static electricity, reception sensitivity, antenna’s
performance, operating system, software
application, etc.
*2
BLUETOOTH standard profiles indicate the
purpose of BLUETOOTH communication
between devices.
Speaker section
2-way speaker system, Bass Reflex
Woofer: 100 mm, cone type
Tweeter: 40 mm, cone type
Dimensions (W/H/D):
Approx. 150 mm × 240 mm × 220 mm
Mass: Approx. 2.0 kg (per unit)
General
Power requirements:
Latin American model:
AC 120 V - 240 V, 50 Hz/60 Hz
Other models:
AC 220 V - 240 V, 50 Hz/60 Hz
Power consumption: 35 watts
Dimensions (W/H/D):
Approx. 290 mm × 106 mm × 221 mm (incl.
projecting parts)
Mass: Approx. 2.7 kg
Supplied accessories: Remote (RM-AMU171) (1),
R6 (Size AA) batteries (2), Speaker cords (2),
Speaker pads (8), FM lead/AM loop antenna (1)
(CMT-SBT100 only), DAB/FM lead antenna (1)
(CMT-SBT100B only), Operating Instructions (this
manual) (1)
Design and specifications are subject to change
without notice.
Standby power consumption: 0.5 W (all wireless network
ports off)
BLUETOOTH Standby mode: 12 W (all wireless network
ports on)