36
4,5
3,6
2
1
4,5
4,5
1
Press FUNCTION repeatedly until
“FM” or “AM” appears.
To record from other components connected
to this system, see “Connecting optional
components” (on page 61).
2
Press MD
z
REC to stand by for
recording.
3
Press MENU/NO repeatedly until
“Setup Menu” appears.
4
Press – or + repeatedly until “T.Mark
Off” (or “T.Mark LSync”) appears, then
press ENTER/YES.
5
Press – or + repeatedly until “T.Mark
LSync” appears, then press ENTER/
YES.
“L-SYNC” lights up.
6
Press MENU/NO.
To continue and record, follow the
procedures described on the various
recording pages.
To change the trigger level for
automatic track marking
Perform the procedure below to change the signal
level that triggers automatic track marking.
1
Press MENU/NO during recording pause until
“Setup Menu” appears.
2
Press – or + repeatedly until “LS(T)” appears,
then press ENTER/YES.
3
Press – or + repeatedly to select the level, then
press ENTER/YES.
You can set the level at any value between
–72 dB and 0 dB, in 2 dB steps.
4
Press MENU/NO.
To cancel automatic track
marking
Press – or + repeatedly until “T.Mark Off” appears
in step 5 above, then press ENTER/YES.
“L-SYNC” disappears. When “L-SYNC” is off, a
track number is marked only at the beginning of
each recording.
Marking track numbers
(continued)
Содержание CMT-PX5
Страница 1: ...Operating Instructions Micro Hi Fi Component System 4 231 125 21 1 2000 Sony Corporation CMT PX5 ...
Страница 78: ......
Страница 79: ......
Страница 80: ...Sony Corporation Printed in Japan ...