CMT-EH26/EH25.GB.3-874-279-12(1)
25
GB
O
thers
Tuner
Severe hum or noise, or stations
cannot be received. (“TUNED” or
“STEREO” flashes on the display.)
Connect the antenna properly.
Find a location and an orientation that
provide good reception, and then set
up the antenna again.
Keep the antennas away from the
speaker cords, the power cord and the
USB cable to avoid picking up noise.
Turn off nearby electrical equipment.
Several radio stations can be heard at
the same time.
Find a location and an orientation that
provide good reception, and then set
up the antenna again.
Bundle the antenna cables using
commercially available cord clips, for
example, and adjust the cable lengths.
To change the AM tuning interval
The AM tuning interval is factory-preset
to 9 kHz (or 10 kHz, for some areas; this
function is not available on the European
and Russian models).
Use buttons on the unit to change the
AM tuning interval.
1
Tune in any AM station, and then
turn off the system.
2
Press
/
to turn off the system.
3
Press DISPLAY
to display the
clock.
4
While the clock is displayed, hold
down
and then press
/
to turn on the system.
All the AM preset stations are erased.
To reset the interval to the factory
preset, repeat the procedure.
To reset the system to factory settings
If the system still does not operate
properly, reset the system to factory
settings.
Use buttons on the unit to reset the
system to its factory default settings.
1
Disconnect and reconnect the power
cord, and then turn on the system.
2
Press
,
and
/
at
the same time.
All user-configured settings, such as
preset radio stations, timer, and the
clock, are deleted.
Содержание CMT-EH25
Страница 1: ......
Страница 32: ...Printed in China ...