Sony CMT-DX400, Руководство по эксплуатации

Страница: 26 / 112

masterpage:Left
filename[D:\Candy.Hong\devia\DEVI(SP..)4\3272961111CMTDF1SP2\01GB-
CMTDF1SP2\100TRB.fm]
26
GB
model name [CMT-DF1]
[3-272-961-
11
(1)] GB
Should you encounter a problem with your
system, do the following:
1
Make sure the power cord and speaker
cords are correctly and firmly connected.
2
Find your problem in the troubleshooting
checklist below and take the indicated
corrective action.
If the problem persists after doing all of the
above, consult your nearest Sony dealer.
Note that if service personnel changes some
parts during repair, these parts may be retained.
General
There is no sound.
• Press VOLUME +.
• Make sure the headphones are not connected.
• Check the speaker connections (page 7).
• The system is in pause mode or in slow-motion
play mode. Press
N
on the unit to return to
Normal Play.
There is severe hum or noise.
• A TV or VCR is placed too close to the unit. Move
the unit away from the TV or VCR.
• Connect the system to a different wall outlet.
• Install a noise filter (commercially available) to
the power cord.
The remote does not function.
• Remove the obstacle.
• Move the remote closer to the system.
• Point the remote at the system’s sensor.
• Replace the batteries (R6/size AA).
• Locate the system away from the fluorescent light.
• Controlling the TV with the remote is only for
Sony TV series, however, some TV products may
also not work.
There is no microphone sound (except for
European models).
• Press repeatedly to adjust the
microphone volume.
• Press MIC LEVEL, then press
M
to add the
microphone control level
• Make sure the microphone is connected to MIC
jack correctly.
• Make sure the microphone is turned on.
There is acoustic feedback.
• Reduce the volume.
• Move the microphone away from the speakers or
change the direction of the microphone.
The color irregularity on a TV screen persists.
• Turn off the TV set once, then turn it on after 15
to 30 minutes. If the color irregularity still
persists, place the speakers farther away from the
TV set.
Speakers
Sound comes from one channel or
unbalanced left and right volume.
• Check the speaker connection and speaker
placement.
Sound lacks bass.
• Check that the speaker cords are connected
correctly.
DVD/VIDEO CD/CD/MP3/JPEG/
DivX/USB player
Play does not start.
• Open the disc compartment and check whether a
disc is loaded.
• Wipe the disc clean (page 31).
• Replace the disc.
• Place the disc that this system can play (page 4).
• Place the disc correctly.
• Place the disc in the tray with the label side up.
• Remove the disc and wipe away the moisture on
the disc, then leave the system turned on for a few
hours until the moisture evaporates.
• Press
N
to start play.
• The region code on the DVD does not match the
system.
The number cannot be input.
• Press SHIFT + number buttons with 2 digits.
For example, to play chapter/track number 5, press
SHIFT + 0 + 5.
Troubleshooting
Problems and remedies
100TRB.fm Page 26 Thursday, March 18, 2010 5:45 PM