Sony CMT-DF1, Руководство по обслуживанию

Страница: 12 / 48

10
HCD-DF1
INITIAL MODE SETTING
Procedure:
1. Press three buttons of
[]
,
[DISPLAY]
and
I/ 1
simultaneously.
2. The system is initialized and turn the power on.
(The function becomes tuner mode and the volume become
16)
SECTION 4
TEST MODE
SECTION 5
MECHANICAL ADJUSTMENTS
PRECAUTION
1. Clean the following parts with a denatured-alcohol-moistened
swab :
record/playback head pinch roller
erase head rubber belts
capstan idlers
2. Demagnetize the record/playback head with a head
demagnetizer. (Do not bring the head magnetizer close to the
erase head.)
3. Do not use a magnetized screwdriver for the adjustments.
4. After the adjustments, appiy suitable locking compound to
the parts adjusted.
5. The adjustments should be performed with the rated power
supply voltage unless otherwise noted.
TORQUE MEASUREMENT
Mode Torque Meter Meter Reading
2.0 – 8.0 mN
⋅
m
FWD CQ-102AS (20 – 80 g
⋅
cm)
(0.28 – 1.12 oz
⋅
inch)
FWD
0.15 – 0.6 mN
⋅
m
Back Tension
CQ-102C (1.5 – 6.0 g
⋅
cm)
(0.021 – 0.083 oz
⋅
inch)
5.0 – 17.7 mN
⋅
m
FF CQ-201AS (50 – 177 g
⋅
cm)
(0.7 – 2.48 oz
⋅
inch)
5.0 – 17.7 mN
⋅
m
REW CQ-201B (50 – 177 g
⋅
cm)
(0.7 – 2.48 oz
⋅
inch)
TAPE TENSION MEASUREMENT
Mode Tension Meter Meter Reading
FWD CQ-403A
more than 80 g
(more than 2.82 oz)