![background image](http://html.mh-extra.com/html/sony/cmt-cp505md/cmt-cp505md_operating-instructions-manual_420294015.webp)
15
GB
MD – Play
CMT-CP505MD 4-241-515-11(1) GB
Programming MD tracks
— Program Play
You can make a program of up to 25 tracks.
1
Press MD on the remote.
2
Press PLAY MODE in stop mode
repeatedly until “PGM” appears.
3
Press
.
or
>
on the remote
repeatedly until the desired track
number appears.
4
Press ENTER/YES on the remote.
The track is programmed.
The step number appears, followed by the
total playing time of the program.
If you made a mistake, you can clear the last
programmed track from the program by
pressing CLEAR on the remote.
5
To program additional tracks, repeat
steps 3 and 4.
6
Press
N
on the remote.
L-SYNC
PGM
Last programmed
track number
Total playing time
Other operations
To
Cancel
Program Play
Check the
program order
Check the total
number of
programmed
tracks
Add a track to
the end of the
program
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press
N
on the remote. However, the program is cleared
after you remove the MD or press GROUP ON/
OFF.
• “---.--” appears when the total program time
exceeds 1,000 minutes.
Do this
Press PLAY MODE in stop mode
repeatedly until both “PGM” and
“SHUF” disappear.
Press
.
or
>
on the remote
repeatedly during Program Play.
Press DISPLAY on the remote in
stop mode. The total number of
programmed steps appears,
followed by the total playing time
of the program.
Perform steps 3 and 4 in stop
mode.