"Kana" is displayed
when the input mode
is Kana.
1 Select the character input mode
with the DISPLAY•kana/
alphanumeric buttons. Katakana
input mode: "Kana" is displayed.
Alphabetic/numeric input mode:
"AB" is displayed. 2Enter your
name. Use the buttons below to
remove and add characters.
function
blinking cursor
operation
To add a track name, artist name, or album
name during recording, select the track to
be named with the M or m button and press
YES•ENTER/MENU to confirm . The cursor
blinks in the input area, and you can enter
characters.
Notes
• If you display a title entered in kana on another MD
device that does not support kana display, it will be
displayed in romaji. At that time, "^" is attached to
the beginning and end (only in MD mode). • This unit
cannot rewrite track names, group names, and disc
names that are longer than 200 characters and were
assigned by another device (only in MD mode). •
You cannot edit the kanji name entered with the
supplied SonicStage software .
72 MDEdit
If you have added a title, you will return to the song
selection screen after step 4 . You can continue to
enter other song titles (up to 99 songs). To finish
editing, press the NO•CANCEL button for 2 seconds
or longer. To enter another title, press the
NO•CANCEL button briefly to return to step 2.
Naming (Continued)
To change the
name, follow the steps in “Name” (71
to this page) to change the name.
Tip • The group
name remains the same until the point where recording is stopped.
• If a name other than the group name is selected during
synchronized recording from a CD,
Delete CLOCK/DELETE character on
cursor . push.
Move the character cursor left or right
with > or . push.
push.
Press 1 TIMER/INSERT character space
before the cursor . put in.
Stop typing. NO CANCEL
Press to confirm.
4 Press the YES ENTER/MENU button
3 Give it a name.
Machine Translated by Google