SECTION 2
DISASSEMBLY
1. Remove the battery cover and the battery. Note
that the SIM card is also located in this area.
2. Remove 4 screws in the battery compartment. The
upper and lower case are held by a number of
claws, positions are indicated.
3. The lower claws can be released by gently
pushing the upper case to left/right versus the
lower case.
4. Insert the hook release jig (p/n 9-948-370-20) in
the gap between upper and lower cosmetic, as
indicated in the picture.
6
Important notes :
1.The IMEI sticker mounted on the main board (visible from the battery compartment) should under no
condition be removed. The IMEI number is the electronic identification of the hardware, it is also stored
electronically and at no time is a discrepancy between number on the sticker and number within the set
logic allowed.
2.The antenna unit can only be lifted off as a unit to allow access to parts underneath. The antenna itself
needs to be handled with care. Damage, deformation or incorrect mounting of the patch antenna can lead
to incorrect performance and even interference of the set.
Содержание CMD-C1
Страница 11: ...SECTION 4 EXPLODED VIEW 11 ...
Страница 23: ...SECTION 4 EXPLODED VIEW 11 ...