SECTION 2
DISASSEMBLY
1. Remove the battery cover and the battery. Note that the
SIM card is also located in this area.
2. Remove 4 screws in the battery compartment. The
upper and lower case are held by a number of
claws, positions are indicated.
3. The lower claws can be released by gently pushing the
upper case to left/right versus the lower case.
4. Insert the hook release jig (p/n 9-948-370-20) in
the gap between upper and lower cosmetic, as
indicated in the picture.
6
Important notes :
1.The IMEI sticker mounted on the main board (visible from the battery compartment) should under no condition be
removed. The IMEI number is the electronic identification of the hardware, it is also stored electronically and at no time
is a discrepancy between number on the sticker and number within the set logic allowed.
2.The antenna unit can only be lifted off as a unit to allow access to parts underneath. The antenna itself needs to be
handled with care. Damage, deformation or incorrect mounting of the patch antenna can lead to incorrect performance
and even interference of the set.
Содержание CMD-C1
Страница 11: ...SECTION 4 EXPLODED VIEW 11 ...
Страница 23: ...SECTION 4 EXPLODED VIEW 11 ...