English
Location and Funktion of Parts and Controls
7
Location and Function of Parts and Controls
Front Panel
1
Disc drawer
Accepts a CD-ROM disc on its tray.
2
Headphones jack
Accepts a stereo headphones set. Analog audio signals are output.
3
Volume control
Controls the volume level of sound output from the headphones jack
2
.
4
Busy indicator
This indicator lights up in one of the following colors to show the unit’s
status.
●
Green: Power on
●
Amber: TOC (table of contents) read, seek, data read, audio playback.
In addition to the above, the indicator flashes alternately in amber and
green while the drawer is in motion.
5
Emergency eject hole
Used to open the disc drawer manually when neither the eject button
6
nor a software command works. Insert a pointed object, such as a paper
clip, into this hole and push.
6
Eject button
Opens and closes the disc drawer.
Software Requirement
To access data on CD-ROM discs, the appropriate device driver and
MSCDEX or its equivalent must be installed in your computer.
The application software you need for using the data on a CD-ROM disc
depends on the type and format of the target data. See the manual supplied
with your CD-ROM disc for instructions.
Example of System Setup
To use the CD-ROM drive unit, the following components are required:
●
Computer (IBM PC, PC/XT, PC/AT, HP Vectra, or equivalent)
●
Floppy disk drive
●
IDE interface cable (40 to 40 pin flat cable)
●
Software (Device driver, Utilities)
6
Introduction
