Basic Operations
6
EN
Playing a CD
1
2
3
4
Turn on the amplifier and select the CD player position so that
you can listen to the sound from this player.
Press POWER to turn on the player.
Press
§
OPEN/CLOSE, and place a disc on the disc tray.
P r e s s
·
.
The disc tray closes and the player plays all the tracks once
(Continuous Play).
Adjust the volume on the amplifier.
•
See pages 4 – 5 for the hookup
information.
If you turn on the player with
a CD in the tray
You can start playing
automatically from the
beginning of the CD. If you
connect a commercially
available timer, you can start
playing the CD at any time
you want.
You can adjust the output
level to the amplifier
Press LINE OUT LEVEL +/–
on the remote. You can
reduce the output level up to
–20 dB.
When you reduce the output
level,
FADE
appears in the
display.
When you turn off the
player, the output level
automatically returns to the
maximum level.
Note
If you press the LINE OUT
LEVEL +/– buttons on the
remote while recording, the
recording level will change
even when it is preset on the
tape deck, etc.
Note
If you push the disc tray in while
the power is off, the disc tray
opens and closes automatically
when you turn on the player
again.
With the label side up
To stop playback
Press
p
.
To
Pause
Resume play after pause
Go to the next track
Go back to the preceding track
Stop play and remove the CD
You need to
Press
P
Press
P
or
·
Turn
AMS
±
clockwise
T u r n A M S
±
counterclockwise
Press
§
OPEN/CLOSE
2
3 4
POWER
OPEN/CLOSE
REPERT
FADER
TIME
PLAY
MODE
PEAK
SEARCH
AUTO
SPACE
MUSIC
SCAN
EDIT/
TIME FADE
AMS
CHECK
CLEAR
ENTER
