143
“Memory Stick” Operations – Recording
Superimposing a still image in the “Memory Stick” on an image
– MEMORY MIX
Recording superimposed images on a “Memory Stick” as a still
image
Before operation
Insert a “Memory Stick” containing still images into your camcorder.
(
1
)
Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the left (unlock) position.
(
2
)
Press MEMORY MIX.
The first recorded image appears in the bottom-right corner of the screen as a
thumbnail image. The last image that is used in MEMORY MIX will be
displayed next time.
(
3
)
Press /– to select the still image you want to superimpose.
– : To see the previous image
+ : To see the next image
(
4
)
Turn the SEL/PUSH EXEC dial to select the desired mode.
The mode changes as follows:
M. CHROM
y
M. LUMI
y
C. CHROM
(
5
)
Press the SEL/PUSH EXEC dial.
The still image overlaps with the picture on the screen.
(
6
)
Turn the SEL/PUSH EXEC dial to adjust the effect.
M. CHROM
– The degree of the blue areas in the still image which is to be
swapped with a moving picture
M. LUMI
– The brightness of the area in the still image which is to be
swapped with a moving picture
C. CHROM
– The degree of the blue areas in the moving picture which is
to be swapped with a still image
The fewer bars there are on the screen, the stronger the effect becomes.
(
7
)
Press PHOTO deeply to start recording.
The image displayed on the screen will be recorded on a “Memory Stick.”
Recording is complete when the bar scroll indicator disappears.
