105
Editing
Step 5: Performing Easy Dubbing
Make sure that your camcorder and VCR are connected, and that the VCR is set to
recording pause.
When you use a video camera recorder, set its power switch to VTR/VCR. Set the
POWER switch of your camcorder to PLAYER.
(1)
Turn the SEL/PUSH EXEC dial to select START, then press the dial.
(2)
Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.
When dubbing ends, your camcorder and VCR stop automatically.
Then the display returns to the Easy Dubbing initial screen.
To stop dubbing during editing
Press
x
on your camcorder.
To quit Easy Dubbing
Press EASY DUB.
Note
If you set the background color to FADE in
Step 3
(p. 103), the picture may not appear
properly depending on the connected VCR.
You cannot record on the VCR when:
– The tape has run out.
– The write-protect tab is set to lock.
– The IR SETUP code is not correct.
– The button used to cancel recording pause is not correct.
NOT READY appears on the screen when
START is not carried out.
Dubbing a tape easily – Easy Dubbing
