40
Menu List
<PROMPTER2 OUT>
M09 (U14)
OUTPUT
PROMPTER2, SD-SYNC,
HD-SYNC,
VF
, VBS
Note
VBS output is not supported when the format is
23.98P or 24P.
VBS-OUT
Displayed when OUTPUT is VBS.
CHARACTER
ON,
OFF
GAIN
–99 to +99,
0
CHROMA
–99 to +99,
0
SETUP
ON,
OFF
Displayed when format is NTSC (SY model).
DOWN CONVERTER
Displayed when OUTPUT is VBS.
SELECT
MAIN
, RET, VF
ASPECT
SQ
, EC
SYNC-OUT
Displayed when OUTPUT is SD-SYNC or HD-SYNC.
V-PHASE
–999 to +999,
0
H-PHASE
–999 to +999,
0
<SDI OUT>
M10 (U15)
SDI-MONI OUT
MAIN,
VF
, RET, HD-PROMPT,
OFF
CHARACTER
ON,
OFF
EMB AUDIO
OFF
, F55 MIC, CA MIC, PGM
(1-MIC1 2- ---)
Display only
(3-AES1 4-AES2)
Display only
(1-PGM1 2-PGM2)
Display only
(3-ENG 4-PROD)
Display only
<TRUNK>
M11
REMOTE SELECT
RM
, TRUNK
<GENLOCK>
M12
REFERENCE
CCU, INTERNAL, GENLOCK
Displays sync status
GENLOCK
ENABLE
, DISABLE
Not displayed when a CCU or BPU is connected.
STATUS
FORMAT
PHASE
V
–1024 to +1023,
0
H
–1700 to +1700,
0
<AUDIO INPUT SEL>
M13
AUDIO IN
F55
, CA, MIC-F55 AES-CA
Selects the audio signal input.
Only CA is enabled when CHU MODE is set to F65.
<F55 AUDIO SET1>
M14
INPUT
Enabled only when CHU MODE is set to F55.
MIC CH1 REF
–60dB,
–50dB
, –40dB
Selects the reference input level when the AUDIO IN
CH1 switch is set to MIC.
MIC CH2 REF
–60dB,
–50dB
, –40dB
Selects the reference input level when the AUDIO IN
CH2 switch is set to MIC.
LIMIT
OFF
, –6dB, –9dB, –12dB, –15dB,
–17dB
Selects the limiter characteristic (saturation level) for
strong input signals when adjusting the audio input
level manually.
OFF:
Do not use limiter.
WIND FILTER
Turns the Window Filter function on/off.
CH1
OFF
, ON
CH2
OFF
, ON
OUTPUT
CH
CH1/CH2
Selects the audio output.
MONITOR
CH1/CH2
, CH1, CH2
Selects the monitor audio output.
MAINTENANCE
Page name
Page No.
Item
Settings
Description
