Sony BVP-E10 Series, Руководство по эксплуатации товара

Страница: 59 / 204

59 Chapter 7 Location and Function of Parts and Controls
BVP-E10 Series Product Information Manual
d d d d
ND filter selector
Selects the desired ND filter.
e
e e
e
CC (colour temperature conversion) filter
(BVPE10WS/ E10WSP only)
Selects the desired CC filter suitable for the lighting
conditions. Note that in the BVP-E10/E10P cameras,
electronic colour temperature correction is used
instead of an optical filter.
f f f f
WHITE BAL (white balance memory select)
switch
Selects the white balance adjustment method and
memory cell to store the adjusted value.
PRESET : White balance is automatically adjusted
to the preset value for the colour temperature of
3,200K.
A or B: Memory cell A or B is selected.
g g g g
OUTPUT/DCC (output signal select/auto knee)
switch
Selects an output signal supplied to a VTR, viewfinder,
and video monitor (colour-bar signals or camera
picture). When a camera picture is selected, the auto
knee function can be activated.
BARS/OFF : Colour-bar signals are output, and the
autoknee circuit does not function.
CAM/OFF : A camera picture is output, but the auto-
knee circuit does not function.
CAM/ON : A camera picture is output, and the auto-
knee circuit functions.
h h h h
GAIN switch
Selects the appropriate video gain ( L ow, M edium,
H igh) according to the illumination of the subject to be
shot. The actual gain values for positions L, M, and H,
are set with the OPERATION Menu.
i
i i
i
VTR switch
When a portable VTR is connected to the camera via
the CA-530/570/570P/950/950P Camera Adaptor, the
VTR starts recording as follows:
SAVE : Power-save position for recording.
Recording starts a few seconds after the VTR
START button is pressed. A newly recorded picture
may not smoothly be connected to the previously
recorded part.
STBY (standby) : Recording starts immediately
upon pressing the VTR START button.
Note:
The WHITE BAL, OUTPUT/DCC, GAIN, and VTR
switches do not function when the camera is
connected to a Camera Control Unit (CCU), RCP or
Remote Control Unit (RM).
j j j j
STATUS/CANCEL switch
STATUS
: Displays the setting status of the camera
on the viewfinder screen when the switch is set to
this position after setting the DISPLAY switch to ON.
CANCEL : Cancels the selection made by the
MENU SELECT knob and restores the previously
selected menu item.
k k k k
DISPLAY switch
Used for displaying the current status of the camera,
settings of format and assignable buttons, and menu
on the viewfinder screen.
ON : Display function activated
OFF : Display function not activated
MENU : A screen for setting the displaying items
and functions appears.
l
l l
l
Memory Stick slot
Insert a Memory Stick to store file data.
m m m m
CA lock screw
Tighten the screw to secure the CA-530/ 570/5 70P/
950/ 950P Camera Adaptor to the camera.
n n n n
LOCK knob
Locks the viewfinder after adjusting the position in the
front-to-rear direction together with the viewfinder lock
lever.
o o o o
Viewfinder lock ring
Locks the viewfinder after adjusting the position side to
side.
p p p p
TEST OUT connector (BNC type)
Supplies the signal selected with the menu operation
or the remote control panel.
Filter No. Filter
1 Clear
2 1/4ND
3 1/16ND
4 1/64ND
Filter No. Filter
A Cross filter
B 3,200K (Clear)
C 4,300K
D 6,300K