Sony BVP-E10 Series, Руководство по эксплуатации товара

Страница: 109 / 204

109 Chapter 7 Location and Function of Parts and Controls
BVP-E10 Series Product Information Manual
B
LCD/touch panel
Normally displays the statuses. When you press
and light the MONITOR button, it displays the
video signal from the connected camera . In RM
Menu or Camera Menu mode, the selected
menu is displayed to permit you to operate the
menu.
C
Control knobs (rotary encoders)
In RM Menu mode, adjust the selected items on
the touch panel. In Camera Menu mode, select
and adjust the menu items using the leftmost
knob.
l l l l
Iris/master black control block
A
AUTO IRIS button
Press and light the button to automatically adjust
the iris according to the subject brightness. If
you press the button when lit, it goes dark, and
manual iris adjustment is enabled.
B
EXT (lens extender) indicator
Illuminates when the lens extender is used on
the connected camera.
C
IRIS control
When the AUTO IRIS button is not lit, you can
adjust the iris manually by turning the control.
When the AUTO IRIS button is lit, you can fine-
adjust the reference value for automatic iris
adjustment in a range of
±
2f with this control.
The adjustment mode of this control is specified
at the factory as Absolute mode, which can also
be changed to Relative mode using the RM
Configuration menu under the Maintenance
menu.
D
IRIS/MB ACTIVE (iris/master black active)
indicator
Illuminates when the control mode is set as
FULL or PART mode with the PANEL ACTIVE
button. When this indicator is lit, iris/master
black controls from this unit are enabled.
E
MASTER BLACK control
Manually adjusts the master black level. The
adjustment mode of this control is specified at
the factory as Relative mode, which can be
changed to Absolute mode using the RM
Configuration menu under the Maintenance
menu.
m m m m
White balance/black balance control block
A
AWB (auto white balance) button
Press to automatically adjust the white balance.
The button illuminates during adjustment and
goes dark when adjustment is completed. If you
press this button when lit, the automatic
adjustment is canceled, and the button flashes.
To stop the flashing, press the button again.
B
ABB (auto black balance) button
Press to automatically adjust the black balance
and black set. The button illuminates during
adjustment and goes dark when adjustment is
completed. If you press this button when lit, the
automatic adjustment is canceled, and the
button flashes. To stop the flashing, press the
button again.
Note:
When the adjustment mode of the BLACK
controls is specified as Absolute mode,
automatic black balance adjustment with ABB
button is disabled.
C
WHITE (white balance) controls
Adjust the R/B white balance. The adjustment
mode of these controls is specified at the factory
as Relative mode, which can be changed to
Absolute mode using the RM Configuration
menu under the Maintenance menu.
D
BLACK (black balance) controls
Adjust the R/B black balance. The adjustment
mode of these controls is specified at the factory
as Relative mode, which can be changed to
Absolute mode using the RM Configuration
menu under the Maintenance menu.
7-15-2 Connector Panel
a a a a
CAMERA connector (8-pin)
Connect to the camera using the supplied remote
control cable.
b b b b
MONITOR connector (BNC)
Connect to a colour monitor to observe the signal from
the camera.
AUTO
IRIS
IRIS/MB
ACTIVE MASTER
BLACK
EXT
IRIS
1
AUTO IRIS
button
2 EXT lens extender
3
IRIS control
4 IRIS/MB ACTIVE
indicator
5
MASTER BLACK
control
AWB
WHITE
BLACK
ABB
1
AWB button
2
ABB button
3
WHITE controls
4 BLACK controls
1
CAMERA connector
2
MONITOR connector
Cover fixing screw