Sony BVE-700A, Руководство по установке

Страница: 5 / 18

1-1 (E)
BVE-700A
1-1. Operating Environment
Operating guaranteed temperature :
+
5
d
C to
+
40
d
C
Performnace guaranteed temperature : + 10 d C to + 35 d C
Operating humidity : 10 % to 90 %
(relative humidity)
Storage temperature :
_
20
d
C to
+
60
d
C
Mass : Processor unit 12 kg
(with BKE-701A
installed)
Control panel 4.5 kg
Prohibited locations
. Areas where the unit will be exposed to direct sunlight or
any other strong lights.
. Dusty areas
.
Areas where it is subject to vibration.
. Areas with strong electric or magnetic fields.
.
Areas near heat sources.
. Areas where is subjected to electricity noise.
.
Areas where is subjected to static electricity noise.
Ventilation
The inside of the BVE-700A is air-cooled by a fan (on left
side).
The power supply can be damaged if the exhaust vent (left
side panel) and air intake (front panel) are blocked or the
fan is stopped.
Therefore, leave a blank space of more than 10 cm in the
front and left side of the BVE-700A.
1-2. Power Supply
1. Power specifications
A switching regulator is used for the power supply of this
unit. The voltage within the range of 100 V to 240 V can
be used without changing the supply voltage.
Power requirements : AC 100 to 240 V
±
10 %
50/60 Hz
Current consumption : Maximum AC100 V ; 1 A
Maximum AC240 V ; 0.5 A
(with all optional boards installed)
n
As the inrush current at turn-on is the maximum 35 A (at
100 V/85 A (at 240 V), the capacity of the AC power must
be commensurate in it.
If the capacity of the AC power is not the adequately large,
the breaker of the AC power at the supply side will operate
or the unit will abnormally operate.
Section 1
Installation
2. Recommended Power Cord
The power cord is not supplied with the BVE-700A.
To get a power cord, please contact your local Sony Sales
Office/Service Center.
w
.
Use the approved Power Cord (3-core mains lead)/
Appliance Connector/Plug with earthing-contacts that
conforms to the safety regulations of each country if
applicable.
.
Use the Power Cord (3-core mains lead)/Appliance
Connector/Plug conforming to the proper ratings (Volt-
age, Ampere).
If you have questions on the use of the above Power Cord/
Appliance Connector/Plug, please contact your local Sony
Sales Office/Service Center.
w
.
Never use an injured power cord.
. Plugging the power cord in the AC inlet, push as far as it
will go.
For customers in the U.S.A. and Canada
1
Power cord, 125 V 10 A (2.4 m) : ! 1-557-377-11
AC inlet
1
For customers in the all European countries
1
Power cord, 250 V 10 A (2.4 m) :
!
1-782-929-22
1
AC inlet